On Thu, Dec 01, 2016 at 01:33:30AM +0800, Icenowy Zheng wrote:
> >>          hdmi-out {
> >>                  compatible = "hdmi-connector";
> >>                  type = "a";
> >>                  /* I2C bus and GPIO references are made up for the 
> >> example */
> >>                  ddc-i2c-bus = <&i2c4>;
> >>                  hpd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>
> >
> > the "hdmi-connector" is a big piece of software. It must handle a lot
> > of more and more exotic connectors.
> > So, I hope that you have written a "simple-hdmi-connector" which does
> > nothing but setting the connector type.
> > Where is it?
> 
> I suddenly thought about something...
> 
> If a DVI connector instead of a HDMI connector is soldered, how
> should such a device tree be written?

Use a dvi-connector instead :)

> How about solder a HDMI-to-VGA bridge on the board? (Maybe there
> should be "dumb-hdmi-dvi-bridge" and "dumb-hdmi-vga-bridge"
> drivers?)

It probably wouldn't be dumb, but yeah, it would definitely be a
bridge instead of the connector.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Attachment: signature.asc
Description: PGP signature

Reply via email to