Hi,

I am using 4.10.0-rc5.
Also, the only spi controller driver that works on A20 is:
https://github.com/OLIMEX/OLINUXINO/blob/master/SOFTWARE/A20/A20-build-3.4.90/spi-sun7i.c
Em 8 de fev de 2017 02:07, "Icenowy Zheng" <[email protected]> escreveu:

>
>
> 08.02.2017, 03:09, "Vinicius Maciel" <[email protected]>:
> > Hi,
> >
> > I have a board based on A20-OLinuXino-LIME2-eMMC, and I'm trying to do a
> SPI communication to work(max11043), but under mainline does not work. It
> works on linux sunxi-3.4, though.
> >
> > Dts code:
> >
> > &spi1 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&spi1_pins_a>,
> >    <&spi1_cs0_pins_a>;
> > status = "okay";
> >
> > max11043: max11043@0 {
> >         compatible = "maxim,max11043";
> >         reg = <0>;
> >         pinctrl-names = "default";
> >         pinctrl-0 = <&pinctrl_max_cnvst>;
> >         convrun-gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; //PH25
> >         pinctrl-1 = <&pinctrl_max_eoc>;
> >         interrupt-parent = <&pio>;
> >         interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; //EINT21(PH21)
> >         spi-max-frequency = <10000000>;
> >     };
> > };
> > pinctrl_max_cnvst: pinctrl_max_cnvst@0 {
> > pins = "PH25";
> > function = "gpio_out";
> > };
> >
> > pinctrl_max_eoc: pinctrl_max_eoc@0 {
> > pins = "PH21";
> > function = "gpio_in";
> > };
> >
> > The output I got when running on linux sunxi-3.4 is:
> > write: 20 40 80
> > read: 20 40 80
> >
> > But in mainline is not ok, the output is:
> > write: 20 40 80
> > read: 81 00 00
> >
> > Any ideas or help are appreciated. Thanks,
>
> Which kernel version are you using?
>
>
> >
> > Vini
> >
> > --
> > You received this message because you are subscribed to the Google
> Groups "linux-sunxi" group.
> > To unsubscribe from this group and stop receiving emails from it, send
> an email to [email protected].
> > For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to