As we have now V3s support in board code, the V3s DTSI file should also
be added.

Add also some CCU include headers to satisfy the DTSI file.

Signed-off-by: Icenowy Zheng <icen...@aosc.xyz>
Acked-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
Changes in v4:
- Add Maxime's ACK.

 arch/arm/dts/sun8i-v3s.dtsi               | 284 ++++++++++++++++++++++++++++++
 include/dt-bindings/clock/sun8i-v3s-ccu.h | 107 +++++++++++
 include/dt-bindings/reset/sun8i-v3s-ccu.h |  78 ++++++++
 3 files changed, 469 insertions(+)
 create mode 100644 arch/arm/dts/sun8i-v3s.dtsi
 create mode 100644 include/dt-bindings/clock/sun8i-v3s-ccu.h
 create mode 100644 include/dt-bindings/reset/sun8i-v3s-ccu.h

diff --git a/arch/arm/dts/sun8i-v3s.dtsi b/arch/arm/dts/sun8i-v3s.dtsi
new file mode 100644
index 0000000000..ebefc0fefe
--- /dev/null
+++ b/arch/arm/dts/sun8i-v3s.dtsi
@@ -0,0 +1,284 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icen...@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       interrupt-parent = <&gic>;
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       compatible = "arm,cortex-a7";
+                       device_type = "cpu";
+                       reg = <0>;
+                       clocks = <&ccu CLK_CPU>;
+               };
+       };
+
+       timer {
+               compatible = "arm,armv7-timer";
+               interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>;
+       };
+
+       clocks {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               osc24M: osc24M_clk {
+                       #clock-cells = <0>;
+                       compatible = "fixed-clock";
+                       clock-frequency = <24000000>;
+                       clock-output-names = "osc24M";
+               };
+
+               osc32k: osc32k_clk {
+                       #clock-cells = <0>;
+                       compatible = "fixed-clock";
+                       clock-frequency = <32768>;
+                       clock-output-names = "osc32k";
+               };
+       };
+
+       soc {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               mmc0: mmc@01c0f000 {
+                       compatible = "allwinner,sun7i-a20-mmc";
+                       reg = <0x01c0f000 0x1000>;
+                       clocks = <&ccu CLK_BUS_MMC0>,
+                                <&ccu CLK_MMC0>,
+                                <&ccu CLK_MMC0_OUTPUT>,
+                                <&ccu CLK_MMC0_SAMPLE>;
+                       clock-names = "ahb",
+                                     "mmc",
+                                     "output",
+                                     "sample";
+                       resets = <&ccu RST_BUS_MMC0>;
+                       reset-names = "ahb";
+                       interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               mmc1: mmc@01c10000 {
+                       compatible = "allwinner,sun7i-a20-mmc";
+                       reg = <0x01c10000 0x1000>;
+                       clocks = <&ccu CLK_BUS_MMC1>,
+                                <&ccu CLK_MMC1>,
+                                <&ccu CLK_MMC1_OUTPUT>,
+                                <&ccu CLK_MMC1_SAMPLE>;
+                       clock-names = "ahb",
+                                     "mmc",
+                                     "output",
+                                     "sample";
+                       resets = <&ccu RST_BUS_MMC1>;
+                       reset-names = "ahb";
+                       interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               mmc2: mmc@01c11000 {
+                       compatible = "allwinner,sun7i-a20-mmc";
+                       reg = <0x01c11000 0x1000>;
+                       clocks = <&ccu CLK_BUS_MMC2>,
+                                <&ccu CLK_MMC2>,
+                                <&ccu CLK_MMC2_OUTPUT>,
+                                <&ccu CLK_MMC2_SAMPLE>;
+                       clock-names = "ahb",
+                                     "mmc",
+                                     "output",
+                                     "sample";
+                       resets = <&ccu RST_BUS_MMC2>;
+                       reset-names = "ahb";
+                       interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               usb_otg: usb@01c19000 {
+                       compatible = "allwinner,sun8i-h3-musb";
+                       reg = <0x01c19000 0x0400>;
+                       clocks = <&ccu CLK_BUS_OTG>;
+                       resets = <&ccu RST_BUS_OTG>;
+                       interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "mc";
+                       phys = <&usbphy 0>;
+                       phy-names = "usb";
+                       extcon = <&usbphy 0>;
+                       status = "disabled";
+               };
+
+               usbphy: phy@01c19400 {
+                       compatible = "allwinner,sun8i-v3s-usb-phy";
+                       reg = <0x01c19400 0x2c>,
+                             <0x01c1a800 0x4>;
+                       reg-names = "phy_ctrl",
+                                   "pmu0";
+                       clocks = <&ccu CLK_USB_PHY0>;
+                       clock-names = "usb0_phy";
+                       resets = <&ccu RST_USB_PHY0>;
+                       reset-names = "usb0_reset";
+                       status = "disabled";
+                       #phy-cells = <1>;
+               };
+
+               ccu: clock@01c20000 {
+                       compatible = "allwinner,sun8i-v3s-ccu";
+                       reg = <0x01c20000 0x400>;
+                       clocks = <&osc24M>, <&osc32k>;
+                       clock-names = "hosc", "losc";
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+               };
+
+               rtc: rtc@01c20400 {
+                       compatible = "allwinner,sun6i-a31-rtc";
+                       reg = <0x01c20400 0x54>;
+                       interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+               };
+
+               pio: pinctrl@01c20800 {
+                       compatible = "allwinner,sun8i-v3s-pinctrl";
+                       reg = <0x01c20800 0x400>;
+                       interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+                       clock-names = "apb", "hosc", "losc";
+                       gpio-controller;
+                       #gpio-cells = <3>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+
+                       uart0_pins_a: uart0@0 {
+                               pins = "PB8", "PB9";
+                               function = "uart0";
+                               bias-pull-up;
+                       };
+
+                       mmc0_pins_a: mmc0@0 {
+                               pins = "PF0", "PF1", "PF2", "PF3",
+                                      "PF4", "PF5";
+                               function = "mmc0";
+                               drive-strength = <30>;
+                               bias-pull-up;
+                       };
+               };
+
+               timer@01c20c00 {
+                       compatible = "allwinner,sun4i-a10-timer";
+                       reg = <0x01c20c00 0xa0>;
+                       interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&osc24M>;
+               };
+
+               wdt0: watchdog@01c20ca0 {
+                       compatible = "allwinner,sun6i-a31-wdt";
+                       reg = <0x01c20ca0 0x20>;
+                       interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+               };
+
+               uart0: serial@01c28000 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28000 0x400>;
+                       interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART0>;
+                       resets = <&ccu RST_BUS_UART0>;
+                       status = "disabled";
+               };
+
+               uart1: serial@01c28400 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28400 0x400>;
+                       interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART1>;
+                       resets = <&ccu RST_BUS_UART1>;
+                       status = "disabled";
+               };
+
+               uart2: serial@01c28800 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28800 0x400>;
+                       interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART2>;
+                       resets = <&ccu RST_BUS_UART2>;
+                       status = "disabled";
+               };
+
+               gic: interrupt-controller@01c81000 {
+                       compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+                       reg = <0x01c81000 0x1000>,
+                             <0x01c82000 0x1000>,
+                             <0x01c84000 0x2000>,
+                             <0x01c86000 0x2000>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+                       interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_HIGH)>;
+               };
+       };
+};
diff --git a/include/dt-bindings/clock/sun8i-v3s-ccu.h 
b/include/dt-bindings/clock/sun8i-v3s-ccu.h
new file mode 100644
index 0000000000..c0d5d5599c
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-v3s-ccu.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icen...@aosc.xyz>
+ *
+ * Based on sun8i-h3-ccu.h, which is:
+ * Copyright (C) 2016 Maxime Ripard <maxime.rip...@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_V3S_H_
+#define _DT_BINDINGS_CLK_SUN8I_V3S_H_
+
+#define CLK_CPU                        14
+
+#define CLK_BUS_CE             20
+#define CLK_BUS_DMA            21
+#define CLK_BUS_MMC0           22
+#define CLK_BUS_MMC1           23
+#define CLK_BUS_MMC2           24
+#define CLK_BUS_DRAM           25
+#define CLK_BUS_EMAC           26
+#define CLK_BUS_HSTIMER                27
+#define CLK_BUS_SPI0           28
+#define CLK_BUS_OTG            29
+#define CLK_BUS_EHCI0          30
+#define CLK_BUS_OHCI0          31
+#define CLK_BUS_VE             32
+#define CLK_BUS_TCON0          33
+#define CLK_BUS_CSI            34
+#define CLK_BUS_DE             35
+#define CLK_BUS_CODEC          36
+#define CLK_BUS_PIO            37
+#define CLK_BUS_I2C0           38
+#define CLK_BUS_I2C1           39
+#define CLK_BUS_UART0          40
+#define CLK_BUS_UART1          41
+#define CLK_BUS_UART2          42
+#define CLK_BUS_EPHY           43
+#define CLK_BUS_DBG            44
+
+#define CLK_MMC0               45
+#define CLK_MMC0_SAMPLE                46
+#define CLK_MMC0_OUTPUT                47
+#define CLK_MMC1               48
+#define CLK_MMC1_SAMPLE                49
+#define CLK_MMC1_OUTPUT                50
+#define CLK_MMC2               51
+#define CLK_MMC2_SAMPLE                52
+#define CLK_MMC2_OUTPUT                53
+#define CLK_CE                 54
+#define CLK_SPI0               55
+#define CLK_USB_PHY0           56
+#define CLK_USB_OHCI0          57
+
+#define CLK_DRAM_VE            59
+#define CLK_DRAM_CSI           60
+#define CLK_DRAM_EHCI          61
+#define CLK_DRAM_OHCI          62
+#define CLK_DE                 63
+#define CLK_TCON0              64
+#define CLK_CSI_MISC           65
+#define CLK_CSI0_MCLK          66
+#define CLK_CSI1_SCLK          67
+#define CLK_CSI1_MCLK          68
+#define CLK_VE                 69
+#define CLK_AC_DIG             70
+#define CLK_AVS                        71
+
+#define CLK_MIPI_CSI           73
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_V3S_H_ */
diff --git a/include/dt-bindings/reset/sun8i-v3s-ccu.h 
b/include/dt-bindings/reset/sun8i-v3s-ccu.h
new file mode 100644
index 0000000000..b58ef21a2e
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-v3s-ccu.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icen...@aosc.xyz>
+ *
+ * Based on sun8i-v3s-ccu.h, which is
+ * Copyright (C) 2016 Maxime Ripard <maxime.rip...@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN8I_V3S_H_
+#define _DT_BINDINGS_RST_SUN8I_V3S_H_
+
+#define RST_USB_PHY0           0
+
+#define RST_MBUS               1
+
+#define RST_BUS_CE             5
+#define RST_BUS_DMA            6
+#define RST_BUS_MMC0           7
+#define RST_BUS_MMC1           8
+#define RST_BUS_MMC2           9
+#define RST_BUS_DRAM           11
+#define RST_BUS_EMAC           12
+#define RST_BUS_HSTIMER                14
+#define RST_BUS_SPI0           15
+#define RST_BUS_OTG            17
+#define RST_BUS_EHCI0          18
+#define RST_BUS_OHCI0          22
+#define RST_BUS_VE             26
+#define RST_BUS_TCON0          27
+#define RST_BUS_CSI            30
+#define RST_BUS_DE             34
+#define RST_BUS_DBG            38
+#define RST_BUS_EPHY           39
+#define RST_BUS_CODEC          40
+#define RST_BUS_I2C0           46
+#define RST_BUS_I2C1           47
+#define RST_BUS_UART0          49
+#define RST_BUS_UART1          50
+#define RST_BUS_UART2          51
+
+#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */
-- 
2.12.0

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to