[email protected] píše v Po 10. 04. 2017 v 18:15 +0800: > 在 2017-04-10 18:06，Ondřej Jirman 写道： > > Hi Maxime, > > > > Maxime Ripard píše v Po 10. 04. 2017 v 08:59 +0200: > > > On Mon, Apr 10, 2017 at 12:19:41AM +0800, Icenowy Zheng wrote: > > > > According to the researching result of Ondrej Jirman, the factor M of > > > > PLL1 shouldn't be used and the factor P should be used only if the > > > > intended frequency is lower than 288MHz. This is proven by the > > > > clk-sun8iw7_tbl.c in the BSP source code -- in there the M value is > > > > always 0 and the maximum frequency that P is not 0 is 224MHz. > > > > > > > > As P is ignored on sun6i, it's not currently used. This patch removed > > > > the usage of M. > > > > > > > > This patch is an original work by Ondrej Jirman, however, he didn't add > > > > a Signed-off-by tag here to his commit. So I take this code and added my > > > > Signed-off-by. > > > > > > > > Signed-off-by: Icenowy Zheng <[email protected]> > > > > --- > > > > > > > > This is a critical patch, and should be added to 2017.05. > > > > > > > > It has been verified by the Armbian. > > > > > > This doesn't mean anything. How has this been verified? > > > > We already discussed this here: https://patchwork.kernel.org/patch/9446 > > 365/ > > P.S. as Chen-Yu dig out, it's not the correct work to restrict factors, > but we need to gate the PLL_CPUX when adjusting. (Of course the mux > should > also be switched to osc24M when PLL_CPUX is gated) > > I tried this on your h3-firmware code, and it succeeded with even P > overused > (for any frequency) (and M is also free in this situation).
Interesting, I was only switching the source of the CPUX clock, and not gating the CPUX_PLL for the test. I guess the kernel still doesn't gate CPUX_PLL, so this whole situation should be fixed by adding the gating of PLL during the chnage and that would be it? Sounds like the cleanest solution so far. regards, o.j. > > > > regards, > > o.j. > > > > > Maxime > > > > > > -- > > > Maxime Ripard, Free Electrons > > > Embedded Linux and Kernel engineering > > > http://free-electrons.com > > > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
signature.asc
Description: This is a digitally signed message part
