The Wi-Fi module of Pine64 is powered via DLDO4 and ELDO1 (the latter one provides I/O voltage).
Add device node for it. Although the Wi-Fi module is an external module which should be inserted to a header, according to my personal talk with TL Lim, he does not want this header to be used as GPIO (so it's with 2.0mm pitch, not 2.54mm as other GPIO headers). Signed-off-by: Icenowy Zheng <[email protected]> --- Changes in v3: - Added explaination on 2.0mm pitch. arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index 7da074f95065..9d90bb32aa87 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -64,6 +64,11 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; }; &ehci1 { @@ -91,6 +96,17 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dldo4>; + vqmmc-supply = <®_eldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + bus-width = <4>; + status = "okay"; +}; + &ohci1 { status = "okay"; }; -- 2.12.2 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
