On Mon, 17 Apr 2017, Icenowy Zheng wrote: > In the binding documentation of AXP20X mfd, the compatible strings used > to be listed for three per line, which leads to some mess when trying to > add AXP803 compatible string (as we have already AXP806 and AXP809 > compatibles, which is after AXP803 in ascending order). > > Make the compatible strings one per line, so that inserting a new > compatible string will be directly a new line. > > Signed-off-by: Icenowy Zheng <icen...@aosc.io> > --- > New patch in v3. > > Documentation/devicetree/bindings/mfd/axp20x.txt | 11 ++++++++--- > 1 file changed, 8 insertions(+), 3 deletions(-)
Applied, thanks. > diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt > b/Documentation/devicetree/bindings/mfd/axp20x.txt > index b41d2601c6ba..a3e813f6060a 100644 > --- a/Documentation/devicetree/bindings/mfd/axp20x.txt > +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt > @@ -9,9 +9,14 @@ axp223 (X-Powers) > axp809 (X-Powers) > > Required properties: > -- compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209", > - "x-powers,axp221", "x-powers,axp223", "x-powers,axp806", > - "x-powers,axp809" > +- compatible: should be one of: > + * "x-powers,axp152" > + * "x-powers,axp202" > + * "x-powers,axp209" > + * "x-powers,axp221" > + * "x-powers,axp223" > + * "x-powers,axp806" > + * "x-powers,axp809" > - reg: The I2C slave address or RSB hardware address for the AXP chip > - interrupt-parent: The parent interrupt controller > - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
