The A83T's PRCM has the same set of clocks and resets as the A64. However, a few dividers are different. And due to the lack of a low speed 32.768 kHz oscillator, a few of the clock parents are different.
The PRCM also has controls for various power domains. These are not supported yet. Signed-off-by: Chen-Yu Tsai <[email protected]> --- Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index 34b2a9249a94..095a5807d874 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -7,6 +7,7 @@ Required properties : - "allwinner,sun8i-a23-ccu" - "allwinner,sun8i-a33-ccu" - "allwinner,sun8i-a83t-ccu" + - "allwinner,sun8i-a83t-r-ccu" - "allwinner,sun8i-h3-ccu" - "allwinner,sun8i-h3-r-ccu" - "allwinner,sun8i-v3s-ccu" @@ -24,7 +25,7 @@ Required properties : - #clock-cells : must contain 1 - #reset-cells : must contain 1 -For the PRCM CCUs on H3/A64, one more clock is needed: +For the PRCM CCUs on A83T/H3/A64, one more clock is needed: - "iosc": the SoC's internal frequency oscillator Example for generic CCU: -- 2.11.0 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
