On Wed, May 24, 2017 at 3:04 PM, Andre Przywara <[email protected]> wrote: > The Linux device tree for the Allwinner A64 SoC has changed a lot since > the U-Boot version was merged. > Let's replace the current DT with a exact copy of the Linux one as of: > commit c6778ff813d2ca3e3c8733c87dc8b6831a64578b > Merge: 0ff4c01 3c0e3abd > Author: Linus Torvalds <[email protected]> > Date: Tue May 9 10:07:33 2017 -0700 > > This is the DT used in Linux 4.12-rc1. > > Since U-Boot has an Ethernet driver (while Linux does not yet), we > provide the required DT nodes for it in an ...-u-boot.dtsi file, to both > mark them as U-Boot specific and to allow easier upgrading once Linux gets > the driver and its own binding later. > Compared to the existing Ethernet DT nodes we just slightly tweak the clock > and reset nodes in there to match the new bindings used by Linux for those. > > Signed-off-by: Andre Przywara <[email protected]> > --- > arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi | 50 ++
Yeah, may be this need to be named something like sun50i-a64-u-boot.dtsi as of now? since it may share the similar dt on other a64 board that we initiate the discussion about orangepi, and BPI. All fine expect this name. Reviewed-by: Jagan Teki <[email protected]> Tested-by: Jagan Teki <[email protected]> thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
