On 02/06/17 19:34, Jagan Teki wrote: > On Wed, Apr 26, 2017 at 8:19 PM, Icenowy Zheng <[email protected]> wrote: >> This patchset contains several works on the sunxi DesignWare DRAM >> controllers. >> >> The 1st patch made an option for H3-like DRAM controllers >> (DesignWare ones), which can ease further import of alike controllers. >> >> The 2nd and 3rd patches are for supporting 16-bit DW DRAM controllers, >> in order to add V3s DRAM support (The controller on V3s is 16-bit). >> >> The 4th patch adds bank detection code, in order to support some DDR2 >> chips. >> >> The 5th patch adds a framework for select DRAM type and timing -- it's >> needed for boards that use DRAM chips rather than DDR3. >> >> The 6th patch enables dual rank detection in the DW DRAM code on SoCs >> except R40. For R40 the dual rank facility is still not so clear, so it's >> temporarily disabled. >> >> The 7th~9th patches enables support for DRAM initialization and SPL for >> the V3s SoC, which integrates a DDR2 chip. >> >> The 10th and 11th patches adds support for LPDDR3, with the stock boot0 >> timing. (Seen in A83T boot0 source and some leaked H5/R40 libdram source) >> >> The 12th patches adds a defconfig for SoPine w/ official baseboard, which >> utilizes LPDDR3. >> >> Icenowy Zheng (12): >> sunxi: makes an invisible option for H3-like DRAM controllers >> sunxi: Rename bus-width related macros in H3 DRAM code >> sunxi: add option for 16-bit DW DRAM controller >> sunxi: add bank detection code to H3 DRAM initialization code >> sunxi: Add selective DRAM type and timing >> sunxi: enable dual rank detection in DesignWare-like DRAM code >> sunxi: add support for the DDR2 in V3s SoC >> sunxi: add support for V3s DRAM controller >> sunxi: enable DRAM initialization and SPL for V3s SoC >> sunxi: add LPDDR3 DRAM type support for DesignWare-like DRAM >> controller >> sunxi: add LPDDR3 timing from stock boot0 >> sunxi: add a defconfig for SoPine w/ official baseboard > > Can you rebase on master and sen it again, difficult to fix the things > while applying.
... maybe on the way fix the minor things I mentioned in the lower part of my reply to 11/12? https://lists.denx.de/pipermail/u-boot/2017-May/290436.html Cheers, Andre. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
