Banana Pi M3 board comes with the A83T EMAC connected to a Realtek
RTL8211E PHY, with a TX delay of 600ps.
Add the necessary DT parts and enable sun8i_emac in the defconfig.
Signed-off-by: Icenowy Zheng <icen...@aosc.io>
---
arch/arm/dts/sun8i-a83t-sinovoip-bpi-m3.dts | 13 +++++++++++++
configs/Sinovoip_BPI_M3_defconfig | 1 +
2 files changed, 14 insertions(+)
diff --git a/arch/arm/dts/sun8i-a83t-sinovoip-bpi-m3.dts
b/arch/arm/dts/sun8i-a83t-sinovoip-bpi-m3.dts
index dfc16a0272..8e74227ad6 100644
--- a/arch/arm/dts/sun8i-a83t-sinovoip-bpi-m3.dts
+++ b/arch/arm/dts/sun8i-a83t-sinovoip-bpi-m3.dts
@@ -61,6 +61,19 @@
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-mode = "rgmii";
+ phy = <&phy1>;
+ allwinner,tx-delay-ps = <600>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_b>;
diff --git a/configs/Sinovoip_BPI_M3_defconfig
b/configs/Sinovoip_BPI_M3_defconfig
index 45eadcb443..ff068900a5 100644
--- a/configs/Sinovoip_BPI_M3_defconfig
+++ b/configs/Sinovoip_BPI_M3_defconfig
@@ -22,6 +22,7 @@ CONFIG_SPL=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SUN8I_EMAC=y
CONFIG_AXP_DCDC5_VOLT=1200
CONFIG_AXP_DLDO3_VOLT=2500
CONFIG_AXP_SW_ON=y
--
2.13.0
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
