On Thu, Jul 27, 2017 at 03:16:44PM +0300, Baruch Siach wrote:
> Hi Yong,
>
> I managed to get the Frame Done interrupt with the previous version of this
> driver on the A33 OLinuXino. No data yet (all zeros). I'm still working on it.
>
> One comment below.
>
> On Thu, Jul 27, 2017 at 01:01:35PM +0800, Yong Deng wrote:
> > Allwinner V3s SoC have two CSI module. CSI0 is used for MIPI interface
> > and CSI1 is used for parallel interface. This is not documented in
> > datasheet but by testing and guess.
> >
> > This patch implement a v4l2 framework driver for it.
> >
> > Currently, the driver only support the parallel interface. MIPI-CSI2,
> > ISP's support are not included in this patch.
> >
> > Signed-off-by: Yong Deng <yong.d...@magewell.com>
> > ---
>
> [...]
>
> > +static int update_buf_addr(struct sun6i_csi *csi, dma_addr_t addr)
> > +{
> > + struct sun6i_csi_dev *sdev = sun6i_csi_to_dev(csi);
> > + /* transform physical address to bus address */
> > + dma_addr_t bus_addr = addr - 0x40000000;
>
> What is the source of this magic number? Is it platform dependent? Are there
> other devices doing DMA that need this adjustment?This is the RAM base address in most (but not all) Allwinner SoCs. You'll want to use PHYS_OFFSET instead. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
signature.asc
Description: PGP signature
