On Fri, Aug 11, 2017 at 6:01 PM, Jagan Teki <jagannadh.t...@gmail.com> wrote:
> From: Jagan Teki <ja...@amarulasolutions.com>
>
> NanoPi A64 is a new board of high performance with low cost
> designed by FriendlyElec., using the Allwinner A64 SOC.
>
> Nanopi A64 features
> - Allwinner A64, 64-bit Quad-core Cortex-A53@648MHz to 1.152GHz, DVFS
> - 1GB DDR3 RAM
> - MicroSD
> - Gigabit Ethernet (RTL8211E)
> - Wi-Fi 802.11b/g/n
> - IR receiver
> - Audio In/Out
> - Video In/Out
> - Serial Debug Port
> - microUSB 5V 2A DC power-supply
>
> Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
> ---
> Changes for v4:
> - Rebased and droped wi-fi related nodes, since it require
> other changes to taken care.
> Changes for v3:
> - Fix to use mmc1 for SDIO instead of mmc2
> - Replace buswidth by 4 instead of 8 mmc1
> - Drop cap-mmc-hw-reset for mmc1
> Changes for v2:
> - Added ohci0, ehci0, ohic1, ehci1, usbphy.
> - Tested on A64
>
> arch/arm64/boot/dts/allwinner/Makefile | 1 +
> .../boot/dts/allwinner/sun50i-a64-nanopi-a64.dts | 114
> +++++++++++++++++++++
> 2 files changed, 115 insertions(+)
> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
>
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile
> b/arch/arm64/boot/dts/allwinner/Makefile
> index 108f12c..c997b5c 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -1,4 +1,5 @@
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
> b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
> new file mode 100644
> index 0000000..e4c121a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
> @@ -0,0 +1,114 @@
> +/*
> + * Copyright (C) 2017 Jagan Teki <jt...@openedev.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-a64.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "FriendlyARM NanoPi A64";
> + compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + reg_vcc3v3: vcc3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
Able to build the RSB with CONFIG_SUNXI_RSB and CONFIG_MFD_AXP20X_RSB
and when I replace the above regulator with axp308 dcdc1 for mmc the
SD card is not detecting and the same issue with pine64 as well.
[ 0.315257] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz
[ 0.315680] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found
[ 0.317782] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
