On Tue, Sep 26, 2017 at 12:17:16PM +0000, Quentin Schulz wrote:
> The AXP813 has only two GPIOs. GPIO0 can either be used as a GPIO, an
> LDO regulator or an ADC. GPIO1 can be used either as a GPIO or an LDO
> regulator.
>
> Moreover, the status bit of the GPIOs when in input mode is not offset
> by 4 unlike the AXP209.
>
> Signed-off-by: Quentin Schulz <quentin.sch...@free-electrons.com>
> ---
> Documentation/devicetree/bindings/pinctrl/pinctrl-axp209.txt | 13 ++-
> drivers/pinctrl/pinctrl-axp209.c | 30 ++++++-
> 2 files changed, 39 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-axp209.txt
> b/Documentation/devicetree/bindings/pinctrl/pinctrl-axp209.txt
> index a5bfe87..a1d5dec 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-axp209.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-axp209.txt
> @@ -4,7 +4,9 @@ This driver follows the usual GPIO bindings found in
> Documentation/devicetree/bindings/gpio/gpio.txt
>
> Required properties:
> -- compatible: Should be "x-powers,axp209-gpio"
> +- compatible: Should be one of:
> + - "x-powers,axp209-gpio"
> + - "x-powers,axp813-pctl"
> - #gpio-cells: Should be two. The first cell is the pin number and the
> second is the GPIO flags.
> - gpio-controller: Marks the device node as a GPIO controller.
> @@ -49,8 +51,17 @@ Example:
> GPIOs and their functions
> -------------------------
>
> +axp209
> +------
> GPIO | Functions
> ------------------------
> GPIO0 | gpio_in, gpio_out, ldo, adc
> GPIO1 | gpio_in, gpio_out, ldo, adc
> GPIO2 | gpio_in, gpio_out
> +
> +axp813
> +------
> +GPIO | Functions
> +------------------------
> +GPIO0 | gpio_in, gpio_out, ldo, adc
> +GPIO1 | gpio_in, gpio_out, ldo
> diff --git a/drivers/pinctrl/pinctrl-axp209.c
> b/drivers/pinctrl/pinctrl-axp209.c
> index 11f871e..500862b 100644
> --- a/drivers/pinctrl/pinctrl-axp209.c
> +++ b/drivers/pinctrl/pinctrl-axp209.c
> @@ -108,11 +108,28 @@ static const struct axp20x_desc_pin axp209_pins[] = {
> AXP20X_FUNCTION(0x2, "gpio_in")),
> };
>
> +static const struct axp20x_desc_pin axp813_pins[] = {
> + AXP20X_PIN(AXP20X_PINCTRL_PIN(0, "GPIO0", (void *)AXP20X_GPIO0_CTRL),
> + AXP20X_FUNCTION(0x0, "gpio_out"),
> + AXP20X_FUNCTION(0x2, "gpio_in"),
> + AXP20X_FUNCTION(0x3, "ldo"),
> + AXP20X_FUNCTION(0x4, "adc")),
> + AXP20X_PIN(AXP20X_PINCTRL_PIN(1, "GPIO1", (void *)AXP20X_GPIO1_CTRL),
> + AXP20X_FUNCTION(0x0, "gpio_out"),
> + AXP20X_FUNCTION(0x2, "gpio_in"),
> + AXP20X_FUNCTION(0x3, "ldo")),
> +};
> +
> static const struct axp20x_pinctrl_desc axp20x_pinctrl_data = {
> .pins = axp209_pins,
> .npins = ARRAY_SIZE(axp209_pins),
> };
>
> +static const struct axp20x_pinctrl_desc axp813_pinctrl_data = {
> + .pins = axp813_pins,
> + .npins = ARRAY_SIZE(axp813_pins),
> +};
> +
> static int axp20x_gpio_input(struct gpio_chip *chip, unsigned offset)
> {
> return pinctrl_gpio_direction_input(chip->base + offset);
> @@ -479,6 +496,7 @@ static int axp20x_pctl_probe(struct platform_device *pdev)
> struct axp20x_pctl *pctl;
> struct pinctrl_desc *pctrl_desc;
> struct pinctrl_pin_desc *pins;
> + struct device_node *np = pdev->dev.of_node;
> int ret, i;
>
> if (!of_device_is_available(pdev->dev.of_node))
> @@ -505,13 +523,18 @@ static int axp20x_pctl_probe(struct platform_device
> *pdev)
> pctl->chip.set = axp20x_gpio_set;
> pctl->chip.direction_input = axp20x_gpio_input;
> pctl->chip.direction_output = axp20x_gpio_output;
> - pctl->chip.ngpio = 3;
>
> pctl->regmap = axp20x->regmap;
>
> - pctl->desc = &axp20x_pinctrl_data;
> - pctl->gpio_status_offset = 4;
> + if (of_device_is_compatible(np, "x-powers,axp209-gpio")) {
> + pctl->desc = &axp20x_pinctrl_data;
> + pctl->gpio_status_offset = 4;
> + } else {
> + pctl->desc = &axp813_pinctrl_data;
> + pctl->gpio_status_offset = 0;
> + }
> pctl->dev = &pdev->dev;
> + pctl->chip.ngpio = pctl->desc->npins;This should be part of a structure that would be attached to the compatible. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
signature.asc
Description: PGP signature
