When SPL is not built, the image size restriction code in sunxi-u-boot.dtsi will lead the build to fail.
Fix this problem by defining a default U-Boot offset when the one from SPL is not available. Signed-off-by: Icenowy Zheng <[email protected]> --- arch/arm/dts/sunxi-u-boot.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/dts/sunxi-u-boot.dtsi b/arch/arm/dts/sunxi-u-boot.dtsi index 72e95afd78..b46608637e 100644 --- a/arch/arm/dts/sunxi-u-boot.dtsi +++ b/arch/arm/dts/sunxi-u-boot.dtsi @@ -7,6 +7,10 @@ * blocks, but devices using something other than that remains to be * seen. */ +#ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR +/* 40KiB for usual 8KiB header + 32KiB Boot0/SPL */ +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (80) +#endif #define UBOOT_MMC_MAX_SIZE (CONFIG_ENV_OFFSET - (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)) / { -- 2.14.2 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
