Ok, will test Ondřej and your branch. This can take some time, I think this weekend I can build and test both.
But this raised some questions: a) How is this going to help you guys fix the stable 4.15.y ? b) I applied the significant changes on DRM and sun4i (that i think would fix) on my 4.15 based on Ondřej 4.16 branch without much help, still same problem. clk.c (4.16) has received some changes and I have not touched it. [ 58.647727] ------------[ cut here ]------------ > > [ 58.647802] WARNING: CPU: 1 PID: 72 at >> drivers/gpu/drm/sun4i/sun4i_crtc.c:57 sun4i_crtc_atomic_begin+0x6c/0x70 > > [ 58.647814] Modules linked in: ir_lirc_codec lirc_dev sunxi_cir >> brcmfmac brcmutil g_serial ipv6 > > [ 58.647909] CPU: 1 PID: 72 Comm: irq/46-1ee0000. Not tainted >> 4.15.7-h2-2 #10 > > [ 58.647920] Hardware name: Allwinner sun8i Family > > [ 58.647999] [<c010e99c>] (unwind_backtrace) from [<c010b5d8>] >> (show_stack+0x10/0x14) > > [ 58.648050] [<c010b5d8>] (show_stack) from [<c07cfd98>] >> (dump_stack+0x88/0x9c) > > [ 58.648092] [<c07cfd98>] (dump_stack) from [<c011bafc>] >> (__warn+0xdc/0xf4) > > [ 58.648128] [<c011bafc>] (__warn) from [<c011bbe4>] >> (warn_slowpath_null+0x40/0x48) > > [ 58.648164] [<c011bbe4>] (warn_slowpath_null) from [<c049bb50>] >> (sun4i_crtc_atomic_begin+0x6c/0x70) > > [ 58.648215] [<c049bb50>] (sun4i_crtc_atomic_begin) from [<c046b528>] >> (drm_atomic_helper_commit_planes+0x74/0x2ac) > > [ 58.648264] [<c046b528>] (drm_atomic_helper_commit_planes) from >> [<c046f6a4>] (drm_atomic_helper_commit_tail+0x28/0x64) > > [ 58.648311] [<c046f6a4>] (drm_atomic_helper_commit_tail) from >> [<c046f760>] (commit_tail+0x80/0x84) > > [ 58.648355] [<c046f760>] (commit_tail) from [<c046f88c>] >> (drm_atomic_helper_commit+0x120/0x124) > > [ 58.648399] [<c046f88c>] (drm_atomic_helper_commit) from [<c0471d2c>] >> (restore_fbdev_mode_atomic+0x178/0x1d4) > > [ 58.648442] [<c0471d2c>] (restore_fbdev_mode_atomic) from [<c047490c>] >> (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0) > > [ 58.648482] [<c047490c>] (drm_fb_helper_restore_fbdev_mode_unlocked) >> from [<c0474988>] (drm_fb_helper_set_par+0x30/0x60) > > [ 58.648521] [<c0474988>] (drm_fb_helper_set_par) from [<c0474884>] >> (drm_fb_helper_hotplug_event.part.11+0xa8/0xb0) > > [ 58.648562] [<c0474884>] (drm_fb_helper_hotplug_event.part.11) from >> [<c0465dc4>] (drm_helper_hpd_irq_event+0xf0/0xfc) > > [ 58.648609] [<c0465dc4>] (drm_helper_hpd_irq_event) from [<c04a7b30>] >> (dw_hdmi_irq+0xfc/0x184) > > [ 58.648655] [<c04a7b30>] (dw_hdmi_irq) from [<c01643b0>] >> (irq_thread_fn+0x1c/0x54) > > [ 58.648692] [<c01643b0>] (irq_thread_fn) from [<c0164684>] >> (irq_thread+0x138/0x1f8) > > [ 58.648732] [<c0164684>] (irq_thread) from [<c013768c>] >> (kthread+0x148/0x150) > > [ 58.648777] [<c013768c>] (kthread) from [<c0107908>] >> (ret_from_fork+0x14/0x2c) > > [ 58.648794] ---[ end trace db8b21de0cfe2bd6 ]--- > > [ 58.904890] ------------[ cut here ]------------ > > [ 58.905010] WARNING: CPU: 1 PID: 72 at >> drivers/gpu/drm/drm_vblank.c:1015 >> drm_atomic_helper_wait_for_vblanks.part.1+0x10c/0x290 > > [ 58.905030] Modules linked in: ir_lirc_codec lirc_dev sunxi_cir >> brcmfmac brcmutil g_serial ipv6 > > [ 58.905207] CPU: 1 PID: 72 Comm: irq/46-1ee0000. Tainted: G W >> 4.15.7-h2-2 #10 > > [ 58.905229] Hardware name: Allwinner sun8i Family > > [ 58.905346] [<c010e99c>] (unwind_backtrace) from [<c010b5d8>] >> (show_stack+0x10/0x14) > > [ 58.905439] [<c010b5d8>] (show_stack) from [<c07cfd98>] >> (dump_stack+0x88/0x9c) > > [ 58.905515] [<c07cfd98>] (dump_stack) from [<c011bafc>] >> (__warn+0xdc/0xf4) > > [ 58.905583] [<c011bafc>] (__warn) from [<c011bbe4>] >> (warn_slowpath_null+0x40/0x48) > > [ 58.905668] [<c011bbe4>] (warn_slowpath_null) from [<c046e104>] >> (drm_atomic_helper_wait_for_vblanks.part.1+0x10c/0x290) > > [ 58.905770] [<c046e104>] (drm_atomic_helper_wait_for_vblanks.part.1) >> from [<c046f6d0>] (drm_atomic_helper_commit_tail+0x54/0x64) > > [ 58.905860] [<c046f6d0>] (drm_atomic_helper_commit_tail) from >> [<c046f760>] (commit_tail+0x80/0x84) > > [ 58.905950] [<c046f760>] (commit_tail) from [<c046f88c>] >> (drm_atomic_helper_commit+0x120/0x124) > > [ 58.906034] [<c046f88c>] (drm_atomic_helper_commit) from [<c0471d2c>] >> (restore_fbdev_mode_atomic+0x178/0x1d4) > > [ 58.906116] [<c0471d2c>] (restore_fbdev_mode_atomic) from [<c047490c>] >> (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0) > > [ 58.906195] [<c047490c>] (drm_fb_helper_restore_fbdev_mode_unlocked) >> from [<c0474988>] (drm_fb_helper_set_par+0x30/0x60) > > [ 58.906273] [<c0474988>] (drm_fb_helper_set_par) from [<c0474884>] >> (drm_fb_helper_hotplug_event.part.11+0xa8/0xb0) > > [ 58.906353] [<c0474884>] (drm_fb_helper_hotplug_event.part.11) from >> [<c0465dc4>] (drm_helper_hpd_irq_event+0xf0/0xfc) > > [ 58.906445] [<c0465dc4>] (drm_helper_hpd_irq_event) from [<c04a7b30>] >> (dw_hdmi_irq+0xfc/0x184) > > [ 58.906530] [<c04a7b30>] (dw_hdmi_irq) from [<c01643b0>] >> (irq_thread_fn+0x1c/0x54) > > [ 58.906601] [<c01643b0>] (irq_thread_fn) from [<c0164684>] >> (irq_thread+0x138/0x1f8) > > [ 58.906674] [<c0164684>] (irq_thread) from [<c013768c>] >> (kthread+0x148/0x150) > > [ 58.906756] [<c013768c>] (kthread) from [<c0107908>] >> (ret_from_fork+0x14/0x2c) > > [ 58.906789] ---[ end trace db8b21de0cfe2bd7 ]--- > > > c) No one experienced this? BR, @lex On Thursday, March 8, 2018 at 3:31:59 AM UTC-3, Jernej Škrabec wrote: > > Hi, > > Dne sreda, 07. marec 2018 ob 23:48:30 CET je 'Ondřej Jirman' via > linux-sunxi > napisal(a): > > Hi, > > > > On Wed, Mar 07, 2018 at 02:17:42PM -0800, @lex wrote: > > > Hi Jernej, > > > > > > Unfortunately, this patch did not fix the issue, unless I did > something > > > silly > > Actually it did, just another issue poped out. I had similar problems when > I > was developing mainline driver. > > > > Here is the complete > > > bootlog: > > > https://gist.github.com/avafinger/ac6b5e73da87797c6ff32d6746e5fac5 > > > > > This looks like clock issue. I don't have any suggestion for out of tree > driver since mainlined driver has this part completely reworked in a > proper > way. Old driver has a lot of hacks here. > > > > *code excerpt:* > > > > > > static void sun4i_crtc_atomic_disable(struct drm_crtc *crtc, > > > > > > struct drm_crtc_state *old_state) > > > > > > { > > > struct drm_encoder *encoder = sun4i_crtc_get_encoder(crtc); > > > struct sun4i_crtc *scrtc = drm_crtc_to_sun4i_crtc(crtc); > > > > > > DRM_DEBUG_DRIVER("Disabling the CRTC\n"); > > > > > > drm_crtc_vblank_off(crtc); > > > > > > sun4i_tcon_set_status(scrtc->tcon, encoder, false); > > > > > > if (crtc->state->event && !crtc->state->active) { > > > spin_lock_irq(&crtc->dev->event_lock); > > > drm_crtc_send_vblank_event(crtc, crtc->state->event); > > > spin_unlock_irq(&crtc->dev->event_lock); > > > > > > crtc->state->event = NULL; > > > } > > > } > > > > > > static void sun4i_crtc_atomic_enable(struct drm_crtc *crtc, > > > > > > struct drm_crtc_state *old_state) > > > > > > { > > > struct drm_encoder *encoder = sun4i_crtc_get_encoder(crtc); > > > struct sun4i_crtc *scrtc = drm_crtc_to_sun4i_crtc(crtc); > > > > > > DRM_DEBUG_DRIVER("Enabling the CRTC\n"); > > > > > > sun4i_tcon_set_status(scrtc->tcon, encoder, true); > > > > > > drm_crtc_vblank_on(crtc); > > > > > > } > > > > > > > > > The issue can be reproducible by just turning on the display in the > > > middle of the boot or after a complete boot. > > > Boot log shows the warning and message after I logged in via TTL > debug > > > and > > > then turned on the display. > > > > > > > > > The second issue is still not fixed also, the display goes blank right > > > after the login prompt is displayed, a few seconds later. If i press > enter > > > then the monitor goes on and don't go blank again. > > > I used *consoleblank=0* just in case but did not help. > > > > > > Kernel is based on megous's work a few days ago, maybe i missed some > other > > > patch? > > > > My 4.15 branch has the old HDMI patches. Try with 4.16 branch, wich has > a > > fairly recent version of the patches including this fix. > > Yeah, I would also suggest that. If it still doesn't work, try https:// > github.com/jernejsk/linux-1/commits/h3_hdmi_v3 which is what it will > eventually be 4.17. Just don't forget to disable SUN4I_CODEC driver since > it > causes boot crash atm. > > Best regards, > Jernej > > > > > regards, > > o. > > > > > On Wednesday, March 7, 2018 at 5:39:10 PM UTC-3, Jernej Škrabec wrote: > > > > Hi, > > > > > > > > Dne sreda, 07. marec 2018 ob 21:30:42 CET je @lex napisal(a): > > > > > ops, i mean turning ON. > > > > > > > > > > On Wednesday, March 7, 2018 at 5:26:59 PM UTC-3, @lex wrote: > > > > > > Hi, > > > > > > > > > > > > Turning HDMI monitor during boot or after complete boot kernel > shows > > > > > > > > the > > > > > > > > > > following error: > > > > > > > > > > > > [ 14.842605] [<c010e99c>] (unwind_backtrace) from [<c010b5d8>] > > > > > > (show_stack+0x10/0x14) > > > > > > [ 14.842698] [<c010b5d8>] (show_stack) from [<c07c4398>] > > > > > > (dump_stack+0x88/0x9c) > > > > > > [ 14.842774] [<c07c4398>] (dump_stack) from [<c011bafc>] > > > > > > (__warn+0xdc/0xf4) > > > > > > [ 14.842840] [<c011bafc>] (__warn) from [<c011bb4c>] > > > > > > (warn_slowpath_fmt+0x38/0x48) > > > > > > [ 14.842931] [<c011bb4c>] (warn_slowpath_fmt) from > [<c0470ab8>] > > > > > > (drm_atomic_helper_commit_modeset_disables+0x468/0x46c) > > > > > > [ 14.843034] [<c0470ab8>] > > > > > > > > (drm_atomic_helper_commit_modeset_disables) > > > > > > > > > > from [<c0470ad4>] (drm_atomic_helper_commit_tail+0x18/0x64) > > > > > > [ 14.843125] [<c0470ad4>] (drm_atomic_helper_commit_tail) from > > > > > > [<c0470ba0>] (commit_tail+0x80/0x84) > > > > > > [ 14.843213] [<c0470ba0>] (commit_tail) from [<c0470ccc>] > > > > > > (drm_atomic_helper_commit+0x120/0x124) > > > > > > [ 14.843298] [<c0470ccc>] (drm_atomic_helper_commit) from > > > > > > > > [<c047325c>] > > > > > > > > > > (restore_fbdev_mode_atomic+0x178/0x1d4) > > > > > > [ 14.843385] [<c047325c>] (restore_fbdev_mode_atomic) from > > > > > > > > [<c0475ce4>] > > > > > > > > > > (drm_fb_helper_restore_fbdev_mode_unlocked.part.9+0x1c/0x78) > > > > > > [ 14.843466] [<c0475ce4>] > > > > > > (drm_fb_helper_restore_fbdev_mode_unlocked.part.9) from > [<c0475dc8>] > > > > > > (drm_fb_helper_set_par+0x54/0x84) > > > > > > [ 14.843543] [<c0475dc8>] (drm_fb_helper_set_par) from > > > > > > [<c0475ca0>] > > > > > > (drm_fb_helper_hotplug_event.part.8+0xa8/0xb0) > > > > > > [ 14.843624] [<c0475ca0>] (drm_fb_helper_hotplug_event.part.8) > > > > > > from > > > > > > [<c0467208>] (drm_helper_hpd_irq_event+0xf0/0xfc) > > > > > > [ 14.843703] [<c0467208>] (drm_helper_hpd_irq_event) from > > > > > > > > [<c04a8f0c>] > > > > > > > > > > (dw_hdmi_irq+0xfc/0x184) > > > > > > [ 14.843775] [<c04a8f0c>] (dw_hdmi_irq) from [<c01643b0>] > > > > > > (irq_thread_fn+0x1c/0x54) > > > > > > [ 14.843846] [<c01643b0>] (irq_thread_fn) from [<c0164684>] > > > > > > (irq_thread+0x138/0x1f8) > > > > > > [ 14.843920] [<c0164684>] (irq_thread) from [<c013768c>] > > > > > > (kthread+0x148/0x150) > > > > > > [ 14.844001] [<c013768c>] (kthread) from [<c0107908>] > > > > > > (ret_from_fork+0x14/0x2c) > > > > > > [ 14.844317] ---[ end trace 98bf403d753cfda9 ]--- > > > > > > > > > > > > > > > > > > I am using framebuffer with 1920x1080 (hdmi) and kernel 4.15.7 > on > > > > > > h2+ > > > > > > HDMI display still works after this. > > > > > > > > You didn't copy the most useful part of that message - the actual > > > > warning. > > > > Fortunately, this issue is know and fix commited today to drm-misc: > > > > > > > > > https://cgit.freedesktop.org/drm/drm-misc/commit/?h=drm-misc-fixes&id=fd > > > > 00c4ee76f0b509ce79ffbc1f5a682fbdd84efd > > > > > > > > However, you are forgetting that this driver is only a week in > drm-misc > > > > repository. You are probably using Armbian with my older, out of > tree > > > > driver. > > > > > > > > Best regards, > > > > Jernej > > > > > > -- > > > You received this message because you are subscribed to the Google > Groups > > > "linux-sunxi" group. To unsubscribe from this group and stop receiving > > > emails from it, send an email to > > > [email protected] <javascript:>. For more options, > visit > > > https://groups.google.com/d/optout. > > > > -- > > You received this message because you are subscribed to the Google > Groups > > "linux-sunxi" group. To unsubscribe from this group and stop receiving > > emails from it, send an email to [email protected] > <javascript:>. > > For more options, visit https://groups.google.com/d/optout. > > > > > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
