A minor update to the v3 version sent earlier this month. I reworked patch 09 to drop the direct MMC environment for 32-bit Allwinner boards as well and keep the current MMC offset. For now I also dropped the two patches changing (back) the MMC regulator. I still believe they are good to have and keep them as U-Boot specific .dtsi files in my tree, possibly posting them later again.
As the previous version, this combines the EMAC DT support update with an update of the full Linux kernel DTs for all H3, H5 and A64 boards. Patch 01 leaves some hint in the README how to avoid the situation when overrunning U-Boot's image size on 64-bit boards. The old v2 EMAC DT update series is in patches 02-08, it prepares U-Boot's EMAC driver for using the new DT binding used in Linux, also updates the DTs to the new EMAC DT node already. Changes to sync the whole of U-Boot's DT files for the H3, H5 and A64 SoCs to those from Linux are in the following patches. However this first requires lifting the space limit we currently have due to the raw MMC environment. Patch 09 disables that for all sunxi boards, to give us finally some space. Patches 10 and 11 consequently revert the disabling of features we saw a few weeks ago to migitate the size problem. Patches 12-19 then bring in the Linux DTs, split by SoCs, with the .dtsi files first, then the board files. Merging the H3 and H5 device tree files brings in significant changes, also to the structure of the .dtsi files. However U-Boot's own DT usage is pretty limited, so it doesn't matter. The huge benefit of syncing the DTs is that we can use U-Boot's DT copy to directly pass it to the kernel, avoiding to actually load a .dtb file from somewhere. To allows seamless and automatic UEFI booting, so distribution installer images should just work (TM). As a goodie the final patch brings in the actual SoPine + baseboard DT files, which we were completely missing so far. This is based on sunxi/master (2d53018a0ef2). Cheers, Andre. Changelog v3 .. v4: - remove MMC environment for all Allwinner boards (including 32 bit ones) - keep MMC environment offset to the old values - drop DT adjustments to use fixed MMC regulator Changelog v2 .. v3: 01: added, was on the list before 02: drop redundant H5 line 03-08: unchanged 09-20: added Changelog v1 .. v2: 01, 02, 03: unchanged 04, 05, 06, 07: added Andre Przywara (19): sunxi: README.sunxi64: Add hint about non-debug of ARM Trusted Firmware sunxi: gpio: add missing compatible strings net: sun8i-emac: support new pinctrl DT bindings net: sun8i-emac: add support for new EMAC DT binding arm: dts: sunxi: update A64 to new EMAC binding arm: dts: sunxi: update H3 to new EMAC binding arm: dts: sunxi: update H5 to new EMAC binding net: sun8i-emac: remove support for old binding sunxi: disable direct MMC environment sunxi: revert disabling of features Revert "sunxi: Pine64: temporarily remove extra Pine64 non-plus DT" sunxi: DT: A64: update device tree file for Allwinner A64 SoC sunxi: DT: A64: update board .dts files from Linux sunxi: DT: update device tree files for Allwinner H3 and H5 SoCs sunxi: DT: H5: update board .dts files from Linux sunxi: DT: H3: update board .dts files from Linux sunxi: DT: H3: update libre-cc board .dts file sunxi: DT: H2+: update Opi-zero .dts sunxi: DT: A64: add proper SoPine baseboard device tree arch/arm/dts/Makefile | 3 +- arch/arm/dts/axp803.dtsi | 150 +++++ arch/arm/dts/sun50i-a64-bananapi-m64.dts | 161 +++++- arch/arm/dts/sun50i-a64-nanopi-a64.dts | 108 +++- arch/arm/dts/sun50i-a64-olinuxino.dts | 131 ++++- arch/arm/dts/sun50i-a64-orangepi-win.dts | 7 +- arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi | 50 -- arch/arm/dts/sun50i-a64-pine64-plus.dts | 17 +- arch/arm/dts/sun50i-a64-pine64.dts | 178 +++++- arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 150 +++++ arch/arm/dts/sun50i-a64-sopine.dtsi | 142 +++++ arch/arm/dts/sun50i-a64.dtsi | 204 ++++++- arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts | 105 +++- arch/arm/dts/sun50i-h5-nanopi-neo2.dts | 89 ++- arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 170 ++++-- arch/arm/dts/sun50i-h5-orangepi-prime.dts | 164 +++++- arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts | 7 +- arch/arm/dts/sun50i-h5.dtsi | 36 +- arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts | 58 +- arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts | 78 ++- arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts | 15 +- arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts | 71 +++ arch/arm/dts/sun8i-h3-nanopi-m1.dts | 6 + arch/arm/dts/sun8i-h3-nanopi-neo-air.dts | 1 - arch/arm/dts/sun8i-h3-nanopi-neo.dts | 6 +- arch/arm/dts/sun8i-h3-orangepi-2.dts | 67 ++- arch/arm/dts/sun8i-h3-orangepi-lite.dts | 25 +- arch/arm/dts/sun8i-h3-orangepi-one.dts | 72 ++- arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts | 9 +- arch/arm/dts/sun8i-h3-orangepi-pc.dts | 88 ++- arch/arm/dts/sun8i-h3-orangepi-plus.dts | 37 +- arch/arm/dts/sun8i-h3-orangepi-plus2e.dts | 18 +- arch/arm/dts/sun8i-h3.dtsi | 488 ++--------------- arch/arm/dts/sunxi-h3-h5.dtsi | 698 ++++++++++++++++++++++++ board/sunxi/README.sunxi64 | 6 + cmd/Kconfig | 5 - configs/pine64_plus_defconfig | 1 + configs/sopine_baseboard_defconfig | 2 +- drivers/gpio/sunxi_gpio.c | 3 + drivers/net/sun8i_emac.c | 89 ++- drivers/video/Kconfig | 2 - env/Kconfig | 1 - include/dt-bindings/clock/sun8i-r-ccu.h | 59 ++ include/dt-bindings/reset/sun8i-r-ccu.h | 53 ++ lib/Kconfig | 1 - 45 files changed, 2979 insertions(+), 852 deletions(-) create mode 100644 arch/arm/dts/axp803.dtsi delete mode 100644 arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi create mode 100644 arch/arm/dts/sun50i-a64-sopine-baseboard.dts create mode 100644 arch/arm/dts/sun50i-a64-sopine.dtsi create mode 100644 arch/arm/dts/sunxi-h3-h5.dtsi create mode 100644 include/dt-bindings/clock/sun8i-r-ccu.h create mode 100644 include/dt-bindings/reset/sun8i-r-ccu.h -- 2.14.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.