The Allwinner A64 SoC features two PWM controllers, which are fully compatible to the one used in the A13 and H3 chips. Add the respective device nodes (one for the "normal" PWM, the other for the one in the CPUS domain) and the pin their output is connected to. On the A64 the "normal" PWM is muxed together with one of the MDIO pins used to communicate with the Ethernet PHY, so it won't be usable on many boards. But the Pinebook laptop uses this pin for controlling the LCD backlight. The CPUS PWM pin however is routed to the "RPi2" header, at the same location as the PWM pin on the RaspberryPi.
Signed-off-by: Andre Przywara <[email protected]> --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 28 +++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index d783d164b9c3..fda1783b1c86 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -321,6 +321,11 @@ bias-pull-up; }; + pwm_pin: pwm_pin { + pins = "PD22"; + function = "pwm"; + }; + rmii_pins: rmii_pins { pins = "PD10", "PD11", "PD13", "PD14", "PD17", "PD18", "PD19", "PD20", "PD22", "PD23"; @@ -537,6 +542,15 @@ #interrupt-cells = <3>; }; + pwm: pwm@1c21400 { + compatible = "allwinner,sun50i-a64-pwm", + "allwinner,sun5i-a13-pwm"; + reg = <0x01c21400 0x400>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; @@ -563,6 +577,15 @@ #reset-cells = <1>; }; + r_pwm: pwm@1f03800 { + compatible = "allwinner,sun50i-a64-pwm", + "allwinner,sun5i-a13-pwm"; + reg = <0x01f03800 0x400>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun50i-a64-r-pinctrl"; reg = <0x01f02c00 0x400>; @@ -578,6 +601,11 @@ pins = "PL0", "PL1"; function = "s_rsb"; }; + + r_pwm_pin: pwm { + pins = "PL10"; + function = "s_pwm"; + }; }; r_rsb: rsb@1f03400 { -- 2.14.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
