Banana Pi M2 Berry has an on-board USB Hub that provides 4 USB Type-A
ports, and it's connected to the USB1 port of the SoC.

Enable it.

Signed-off-by: Icenowy Zheng <icen...@aosc.io>
---
Changes in v3:
- Dropped OHCI node and added hub model comment in EHCI.

 arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts 
b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index a26d72c3f9b5..35859d8f3267 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -87,6 +87,11 @@
        };
 };
 
+&ehci1 {
+       /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
+       status = "okay";
+};
+
 &i2c0 {
        status = "okay";
 
@@ -170,3 +175,8 @@
        pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
+
+&usbphy {
+       usb1_vbus-supply = <&reg_vcc5v0>;
+       status = "okay";
+};
-- 
2.15.1

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to