Il 10/04/2018 23:31, Paul Kocialkowski ha scritto:
This adds the pins definition for RGB666 LCD panels on the A20. It was
imported from the A33 definition, that concernes the same set of pins.

Signed-off-by: Paul Kocialkowski <cont...@paulk.fr>
  arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
  1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index e529e4ff2174..f46af8675cfa 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -781,6 +781,14 @@
                                function = "ir1";
+ lcd_rgb666_pins: lcd_rgb666@0 {

I point you to this Thread and back:

I did the same for rgb888, so good part is discussed.

IMHO I would:
- call lcd0_rgb666_pins, since this is for LCD0 interface
- same as above, call lcd0-rgb666, take care about using "-" instad of "_" that can cause DTC warnings.
- remove @0 since only this set can achieve LCD0 RGB666, and I
  don't think there will be other combinations.

Kind regards

Giulio Benetti

Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

+                               pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+                                      "PD10", "PD11", "PD12", "PD13", "PD14", 
+                                      "PD18", "PD19", "PD20", "PD21", "PD22", 
+                                      "PD24", "PD25", "PD26", "PD27";
+                               function = "lcd0";
+                       };
                        mmc0_pins_a: mmc0@0 {
                                pins = "PF0", "PF1", "PF2",
                                       "PF3", "PF4", "PF5";

You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to