On Thu, Aug 30, 2018 at 05:44:57PM +0200, Philipp Rossak wrote:
> We want to use this driver mostly as thermal sensor, that still supports
> the adc for the older chips, thus we threat the A33 as thermal sensor.
> We also remove the adc channel without thermal support.

Threat -> treat (in the title and in the message body too)

> Signed-off-by: Philipp Rossak <[email protected]>
> ---
>  drivers/iio/adc/sun4i-gpadc-iio.c | 19 -------------------
>  1 file changed, 19 deletions(-)
> 
> diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c 
> b/drivers/iio/adc/sun4i-gpadc-iio.c
> index ab474ce86fb6..658a7e3e3370 100644
> --- a/drivers/iio/adc/sun4i-gpadc-iio.c
> +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
> @@ -123,23 +123,6 @@ static const struct iio_chan_spec sun4i_gpadc_channels[] 
> = {
>       },
>  };
>  
> -static const struct iio_chan_spec sun4i_gpadc_channels_no_temp[] = {
> -     SUN4I_GPADC_ADC_CHANNEL(0, "adc_chan0"),
> -     SUN4I_GPADC_ADC_CHANNEL(1, "adc_chan1"),
> -     SUN4I_GPADC_ADC_CHANNEL(2, "adc_chan2"),
> -     SUN4I_GPADC_ADC_CHANNEL(3, "adc_chan3"),
> -};
> -
> -static const struct iio_chan_spec sun8i_a33_gpadc_channels[] = {
> -     {
> -             .type = IIO_TEMP,
> -             .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> -                                   BIT(IIO_CHAN_INFO_SCALE) |
> -                                   BIT(IIO_CHAN_INFO_OFFSET),
> -             .datasheet_name = "temp_adc",
> -     },
> -};
> -
>  static const struct regmap_config sun4i_gpadc_regmap_config = {
>       .reg_bits = 32,
>       .val_bits = 32,
> @@ -444,8 +427,6 @@ static int sun4i_gpadc_probe_dt(struct platform_device 
> *pdev,
>               return -ENODEV;
>  
>       info->no_irq = true;
> -     indio_dev->num_channels = ARRAY_SIZE(sun8i_a33_gpadc_channels);
> -     indio_dev->channels = sun8i_a33_gpadc_channels;
>  
>       mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>       base = devm_ioremap_resource(&pdev->dev, mem);
> -- 
> 2.11.0
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected].
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to