A64 manual say PLL_MIPI rates are 500MHz to 1.4GHz, but using minimum 500MHz can't release the clock and which is not working.
So use working minimum rate as 300MHz which is tested on Bananapi DSI panel. Signed-off-by: Jagan Teki <[email protected]> --- Changes for v2: - new patch drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c index 019d67bf97c4..5a3a5b821f8b 100644 --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c @@ -167,6 +167,8 @@ static struct ccu_nkm pll_mipi_clk = { .n = _SUNXI_CCU_MULT(8, 4), .k = _SUNXI_CCU_MULT_MIN(4, 2, 2), .m = _SUNXI_CCU_DIV(0, 4), + .min_rate = 300000000, /* Actual rate is 500MHz */ + .max_rate = 1400000000UL, .common = { .reg = 0x040, .hw.init = CLK_HW_INIT("pll-mipi", "pll-video0", -- 2.18.0.321.gffc6fa0e3 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
