On Tue, Oct 23, 2018 at 09:20:22PM +0530, Jagan Teki wrote: > Some NKM PLLs doesn't work well when their output clock rate is set below > certain rate. > > So, add support for minimal rate for relevant PLLs. > > Signed-off-by: Jagan Teki <[email protected]> > --- > Changes for v2: > - new patch > > drivers/clk/sunxi-ng/ccu_nkm.c | 7 +++++++ > drivers/clk/sunxi-ng/ccu_nkm.h | 1 + > 2 files changed, 8 insertions(+) > > diff --git a/drivers/clk/sunxi-ng/ccu_nkm.c b/drivers/clk/sunxi-ng/ccu_nkm.c > index 841840e35e61..d17539dc88dd 100644 > --- a/drivers/clk/sunxi-ng/ccu_nkm.c > +++ b/drivers/clk/sunxi-ng/ccu_nkm.c > @@ -125,6 +125,13 @@ static unsigned long ccu_nkm_round_rate(struct > ccu_mux_internal *mux, > if (nkm->common.features & CCU_FEATURE_FIXED_POSTDIV) > rate *= nkm->fixed_post_div; > > + if (rate < nkm->min_rate) { > + rate = nkm->min_rate; > + if (nkm->common.features & CCU_FEATURE_FIXED_POSTDIV) > + rate /= nkm->fixed_post_div;
I'm not sure this is right. Is the post divider taken into account to calculate the minimum, or is the minimum on the rate before the fixed post divider. How did you test this? Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
