Hi Priit,

On Mon, 19 Nov 2018 at 19:08, Priit Laes <[email protected]> wrote:
>
> On Sun, Nov 18, 2018 at 06:12:34PM +0000, Priit Laes wrote:
> > On Sat, Nov 17, 2018 at 05:19:38PM +0100, Paul Kocialkowski wrote:
> > > Hi,
> > >
> > > On Fri, 2018-11-16 at 15:07 +0000, Priit Laes wrote:
> > > > On Fri, Nov 16, 2018 at 03:46:14PM +0100, Jens Thiele wrote:
> > > > > Priit Laes <[email protected]> writes:
> > > > >
> > > > > > Heya!
> > > > > >
> > > > > > I've been running into intermittent u-boot hangs
> > > > > > (latest u-boot and kernel mainline versions) on various
> > > > > > Olimex A20 Lime2 boards. These hangs seem to happen always
> > > > > > in the same spot after rebooting mainline kernel:
> > > > > >
> > > > > > [snip]
> > > > > > U-Boot SPL 2018.11-rc2-00064-gada6bb81d9-dirty (Nov 16 2018 - 
> > > > > > 15:48:29 +0200)
> > > > > > DR
> > > > > > [/snip]
> > > > > >
> > > > > > Any ideas what to test?
> > > > >
> > > > > is your power supply unit strong enough? (especially if you have LCD
> > > > > displays attached)
> > > >
> > > > Should be, 2A 5V brick via barrel connector.
> > > >
> > > > Other things connected:
> > > > - serial (uart)
> > > > - ethernet cable
> > > > - hdmi cable
> > > > - otg cable
> > >
> > > I have been experiencing the same issue on an A20-OLinuXino-Lime2 (non-
> > > eMMC). It seems to happen when rebooting from the kernel, but not with
> > > the "reset" command in U-Boot.
> >
> > Yes, confirming that reset command from u-boot works.

>
> OK, I managed to track it down to enabling ALDO3 regulator.
> Unfortunately adding delays did not help, and only thing
> that seems to be working is to disable regulator in the
> configuration (CONFIG_AXP_ALDO3_VOLT ):
>

Probably related to this old thread -
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html

> [snip]
> diff --git a/board/sunxi/board.c b/board/sunxi/board.c
> index d1d7f9f400..70d8e7a0f7 100644
> --- a/board/sunxi/board.c
> +++ b/board/sunxi/board.c
> @@ -552,14 +552,22 @@ void sunxi_board_init(void)
>         defined CONFIG_AXP818_POWER
>         power_failed |= axp_set_aldo1(CONFIG_AXP_ALDO1_VOLT);
>  #endif
> +    puts("aldo2\n");
> +    udelay(100000);
>         power_failed |= axp_set_aldo2(CONFIG_AXP_ALDO2_VOLT);
>  #if !defined(CONFIG_AXP152_POWER)
> +    puts("aldo3\n");
> +    udelay(100000);
>         power_failed |= axp_set_aldo3(CONFIG_AXP_ALDO3_VOLT);
>  #endif
>  #ifdef CONFIG_AXP209_POWER
> +    puts("aldo4\n");
> +    udelay(100000);
>         power_failed |= axp_set_aldo4(CONFIG_AXP_ALDO4_VOLT);
>  #endif
>
> +    puts("OK?\n");
> +
>  #if defined(CONFIG_AXP221_POWER) || defined(CONFIG_AXP809_POWER) || \
>         defined(CONFIG_AXP818_POWER)
>         power_failed |= axp_set_dldo(1, CONFIG_AXP_DLDO1_VOLT);
> [/snip]
>
> > >
> > > Cheers,
> > >
> > > Paul
> > >
> > > --
> > > Developer of free digital technology and hardware support.
> > >
> > > Website: https://www.paulk.fr/
> > > Coding blog: https://code.paulk.fr/
> > > Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/
> > >
> > > --
> > > You received this message because you are subscribed to the Google Groups 
> > > "linux-sunxi" group.
> > > To unsubscribe from this group and stop receiving emails from it, send an 
> > > email to [email protected].
> > > For more options, visit https://groups.google.com/d/optout.
> >
> >
> > --
> > You received this message because you are subscribed to the Google Groups 
> > "linux-sunxi" group.
> > To unsubscribe from this group and stop receiving emails from it, send an 
> > email to [email protected].
> > For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups 
> "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected].
> For more options, visit https://groups.google.com/d/optout.

Regards,
Jonathan

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to