On Sun, Nov 18, 2018 at 05:17:12PM +0300, Mesih Kilinc wrote:
> F1C100s is one product with the suniv die, which has a 32MiB co-packaged
> DDR1 DRAM chip. As we have the support for suniv pin controller and CCU now, 
> add a
> initial DTSI for it.
> 
> Signed-off-by: Icenowy Zheng <[email protected]>
> Signed-off-by: Mesih Kilinc <[email protected]>
> ---
>  arch/arm/boot/dts/suniv-f1c100s.dtsi | 158 
> +++++++++++++++++++++++++++++++++++
>  1 file changed, 158 insertions(+)
>  create mode 100644 arch/arm/boot/dts/suniv-f1c100s.dtsi
> 
> diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi 
> b/arch/arm/boot/dts/suniv-f1c100s.dtsi
> new file mode 100644
> index 0000000..d98f658
> --- /dev/null
> +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
> @@ -0,0 +1,158 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR X11)
> +/*
> + * Copyright 2018 Icenowy Zheng <[email protected]>
> + * Copyright 2018 Mesih Kilinc <[email protected]>
> + */
> +
> +#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
> +#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
> +
> +/ {
> +     #address-cells = <1>;
> +     #size-cells = <1>;
> +     interrupt-parent = <&intc>;
> +
> +     clocks {
> +             #address-cells = <1>;
> +             #size-cells = <1>;
> +             ranges;
> +
> +             osc24M: clk-24M {
> +                     #clock-cells = <0>;
> +                     compatible = "fixed-clock";
> +                     clock-frequency = <24000000>;
> +                     clock-output-names = "osc24M";
> +             };
> +
> +             osc32k: clk-32k {
> +                     #clock-cells = <0>;
> +                     compatible = "fixed-clock";
> +                     clock-frequency = <32768>;
> +                     clock-output-names = "osc32k";
> +             };
> +
> +             fake100M: clk-100M {
> +                     #clock-cells = <0>;
> +                     compatible = "fixed-clock";
> +                     clock-frequency = <100000000>;
> +                     clock-output-names = "fake-100M";
> +             };

Why do you need that fake clock?

> +     };
> +
> +     cpus {
> +             #address-cells = <0>;
> +             #size-cells = <0>;
> +
> +             cpu {
> +                     compatible = "arm,arm926ej-s";
> +                     device_type = "cpu";
> +             };
> +     };
> +
> +     soc {
> +             compatible = "simple-bus";
> +             #address-cells = <1>;
> +             #size-cells = <1>;
> +             ranges;
> +
> +             sram-controller@1c00000 {
> +                     compatible = "allwinner,sun4i-a10-sram-controller";

You should have a compatible for that SoC there (possibly keeping the
A10 compatible if that makes sense).

> +                     reg = <0x01c00000 0x30>;
> +                     #address-cells = <1>;
> +                     #size-cells = <1>;
> +                     ranges;
> +
> +                     sram_d: sram@10000 {
> +                             compatible = "mmio-sram";
> +                             reg = <0x00010000 0x1000>;
> +                             #address-cells = <1>;
> +                             #size-cells = <1>;
> +                             ranges = <0 0x00010000 0x1000>;
> +
> +                             otg_sram: sram-section@0 {
> +                                     compatible = 
> "allwinner,sun4i-a10-sram-d";

Ditto

> +                                     reg = <0x0000 0x1000>;
> +                                     status = "disabled";
> +                             };
> +                     };
> +             };
> +
> +             ccu: clock@1c20000 {
> +                     compatible = "allwinner,suniv-f1c100s-ccu";
> +                     reg = <0x01c20000 0x400>;
> +                     clocks = <&osc24M>, <&osc32k>;
> +                     clock-names = "hosc", "losc";
> +                     #clock-cells = <1>;
> +                     #reset-cells = <1>;
> +             };
> +
> +             intc: interrupt-controller@1c20400 {
> +                     compatible = "allwinner,suniv-f1c100s-ic";
> +                     reg = <0x01c20400 0x400>;
> +                     interrupt-controller;
> +                     #interrupt-cells = <1>;
> +             };
> +
> +             pio: pinctrl@1c20800 {
> +                     compatible = "allwinner,suniv-f1c100s-pinctrl";
> +                     reg = <0x01c20800 0x400>;
> +                     interrupts = <38>, <39>, <40>;
> +                     clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
> +                     clock-names = "apb", "hosc", "losc";
> +                     gpio-controller;
> +                     interrupt-controller;
> +                     #interrupt-cells = <3>;
> +                     #gpio-cells = <3>;
> +
> +                     uart0_pins_a: uart-pins-pe {
> +                             pins = "PE0", "PE1";
> +                             function = "uart0";
> +                     };
> +             };
> +
> +             timer@1c20c00 {
> +                     compatible = "allwinner,suniv-f1c100s-timer";
> +                     reg = <0x01c20c00 0x90>;
> +                     interrupts = <13>;
> +                     clocks = <&osc24M>;
> +             };
> +
> +             wdt: watchdog@1c20ca0 {
> +                     compatible = "allwinner,sun6i-a31-wdt";

Ditto.

Thanks!
Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Attachment: signature.asc
Description: PGP signature

Reply via email to