Pin PH11 is used on various A83T board to detect a change in the OTG
port's ID pin, as in when an OTG host cable is plugged in.
The incorrect offset meant the gpiochip/irqchip was activating the wrong
pin for interrupts.
Fixes: 4730f33f0d82 ("pinctrl: sunxi: add allwinner A83T PIO controller
support")
Cc: <[email protected]>
Signed-off-by: Chen-Yu Tsai <[email protected]>
---
drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c
b/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c
index 6624499eae72..4ada80317a3b 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c
@@ -568,7 +568,7 @@ static const struct sunxi_desc_pin sun8i_a83t_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 11),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 1)), /* PH_EINT11 */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 11)), /* PH_EINT11 */
};
static const struct sunxi_pinctrl_desc sun8i_a83t_pinctrl_data = {
--
2.20.0.rc1
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
