On 11/12/18 10:20 PM, Maxime Ripard wrote:
On Tue, Dec 11, 2018 at 10:05:43PM +0530, Jagan Teki wrote:
On 11/12/18 10:02 PM, Maxime Ripard wrote:
On Mon, Dec 10, 2018 at 09:47:27PM +0530, Jagan Teki wrote:
Minimum PLL used for MIPI is 500MHz, as per manual, but
lowering the min rate by 300MHz can result proper working
nkms divider with the help of desired dclock rate from
panel driver.
Signed-off-by: Jagan Teki <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
---
drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index 181b599dc163..b623c8150b4f 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -183,6 +183,7 @@ static struct ccu_nkm pll_mipi_clk = {
.n = _SUNXI_CCU_MULT(8, 4),
.k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
.m = _SUNXI_CCU_DIV(0, 4),
+ .min_rate = 300000000, /* Actual rate is 500MHz */
That comment still doesn't make any sense. Is it running at 500MHz or 300?
It running in 300MHz, actual rate is 500MHz.
If it's running at 300MHz, its actual rate should be 300MHz...
What I mean here is actual rate mentioned as per manual is 500MHz.
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.