I've tried to apply this patch in a hope to get the thermal sensor working
but things got hairy, can anyone please explain what is wrong with this
patch:
https://patchwork.kernel.org/patch/10555615/
Warnings:
DTC arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dtb
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dtb: Warning
(reg_format): /soc/eeprom@1c14000/calib@234:reg: property has invalid
length (8 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dtb: Warning
(pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dtb: Warning
(simple_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dtb: Warning
(i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dtb: Warning
(spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dtb: Warning
(avoid_default_addr_size): /soc/eeprom@1c14000/calib@234: Relying on
default #address-cells value
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dtb: Warning
(avoid_default_addr_size): /soc/eeprom@1c14000/calib@234: Relying on
default #size-cells value
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dtb: Warning
(thermal_sensors_property): /thermal-zones/cpu0-thermal:thermal-sensors:
property size (8) too small for cell size 2
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dtb: Warning
(thermal_sensors_property): /thermal-zones/gpu0-thermal:thermal-sensors:
property size (8) too small for cell size 2
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dtb: Warning
(thermal_sensors_property): /thermal-zones/gpu1-thermal:thermal-sensors:
property size (8) too small for cell size 2
DTC arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dtb
arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dtb: Warning
(reg_format): /soc/eeprom@1c14000/calib@234:reg: property has invalid
length (8 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dtb: Warning
(pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dtb: Warning
(simple_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dtb: Warning
(i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dtb: Warning
(spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dtb: Warning
(avoid_default_addr_size): /soc/eeprom@1c14000/calib@234: Relying on
default #address-cells value
arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dtb: Warning
(avoid_default_addr_size): /soc/eeprom@1c14000/calib@234: Relying on
default #size-cells value
arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dtb: Warning
(thermal_sensors_property): /thermal-zones/cpu0-thermal:thermal-sensors:
property size (8) too small for cell size 2
arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dtb: Warning
(thermal_sensors_property): /thermal-zones/gpu0-thermal:thermal-sensors:
property size (8) too small for cell size 2
arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dtb: Warning
(thermal_sensors_property): /thermal-zones/gpu1-thermal:thermal-sensors:
property size (8) too small for cell size 2
On Friday, January 11, 2019 at 6:38:05 PM UTC-2, @lex wrote:
>
> Hi,
> I am running stable kernel 4.20.1 on NanoPi A64 with the linux-sunxi
> community patches and it works really well thanks for the hard work however
> i am struggling to get the sound card (any) detected and the upper USB
> receptacle is not working (for some reason).
>
> Regarding the USB upper slot i have in my dtsi:
>
> usbphy: phy@1c19400 {
> compatible = "allwinner,sun50i-a64-usb-phy";
> reg = <0x01c19400 0x14>,
> <0x01c1a800 0x4>,
> <0x01c1b800 0x4>;
> reg-names = "phy_ctrl",
> "pmu0",
> "pmu1";
> clocks = <&ccu CLK_USB_PHY0>,
> <&ccu CLK_USB_PHY1>;
> clock-names = "usb0_phy",
> "usb1_phy";
> resets = <&ccu RST_USB_PHY0>,
> <&ccu RST_USB_PHY1>;
> reset-names = "usb0_reset",
> "usb1_reset";
> status = "disabled";
> #phy-cells = <1>;
> };
>
>
> ehci0: usb@1c1a000 {
> compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
> reg = <0x01c1a000 0x100>;
> interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&ccu CLK_BUS_OHCI0>,
> <&ccu CLK_BUS_EHCI0>,
> <&ccu CLK_USB_OHCI0>;
> resets = <&ccu RST_BUS_OHCI0>,
> <&ccu RST_BUS_EHCI0>;
> status = "disabled";
> };
>
>
> ohci0: usb@1c1a400 {
> compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
> reg = <0x01c1a400 0x100>;
> interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&ccu CLK_BUS_OHCI0>,
> <&ccu CLK_USB_OHCI0>;
> resets = <&ccu RST_BUS_OHCI0>;
> status = "disabled";
> };
>
>
> ehci1: usb@1c1b000 {
> compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
> reg = <0x01c1b000 0x100>;
> interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&ccu CLK_BUS_OHCI1>,
> <&ccu CLK_BUS_EHCI1>,
> <&ccu CLK_USB_OHCI1>;
> resets = <&ccu RST_BUS_OHCI1>,
> <&ccu RST_BUS_EHCI1>;
> phys = <&usbphy 1>;
> phy-names = "usb";
> status = "disabled";
> };
>
>
> ohci1: usb@1c1b400 {
> compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
> reg = <0x01c1b400 0x100>;
> interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&ccu CLK_BUS_OHCI1>,
> <&ccu CLK_USB_OHCI1>;
> resets = <&ccu RST_BUS_OHCI1>;
> phys = <&usbphy 1>;
> phy-names = "usb";
> status = "disabled";
> };
>
>
> and my dts:
>
> &ehci0 {
> status = "okay";
> };
>
>
> &ehci1 {
> status = "okay";
> };
>
>
> &ohci0 {
> status = "okay";
> };
>
>
> &ohci1 {
> status = "okay";
> };
>
>
> But the upper slot is dead (but works with legacy kernel, so no hardware
> issue)
> Can someone pinpoint what is wrong with this setup or what i missed?
>
>
> Regarding sound card, i have:
> &codec {
> status = "okay";
> };
>
>
> &codec_analog {
> status = "okay";
> };
>
>
> &sound {
> status = "okay";
> };
>
>
> but no sound card detected (audiocodec or hdmicodec), any advice?
>
> Another question, i cannot have thermal readout even with:
> thermal-zones {
> cpu_thermal: cpu0-thermal {
> /* milliseconds */
> polling-delay-passive = <250>;
> polling-delay = <1000>;
> thermal-sensors = <&ths 0>;
>
>
> cooling-maps {
> map0 {
> trip = <&cpu_alert0>;
> cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> };
> map1 {
> trip = <&cpu_alert1>;
> cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> };
> };
> trips {
> cpu_alert0: cpu_alert0 {
> /* milliCelsius */
> temperature = <75000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
>
> cpu_alert1: cpu_alert1 {
> /* milliCelsius */
> temperature = <90000>;
> hysteresis = <2000>;
> type = "hot";
> };
>
>
> cpu_crit: cpu_crit {
> /* milliCelsius */
> temperature = <110000>;
> hysteresis = <2000>;
> type = "critical";
> };
> };
> };
> gpu0_thermal: gpu0-thermal {
> /* milliseconds */
> polling-delay-passive = <250>;
> polling-delay = <1000>;
> thermal-sensors = <&ths 1>;
> };
> gpu1_thermal: gpu1-thermal {
> /* milliseconds */
> polling-delay-passive = <250>;
> polling-delay = <1000>;
> thermal-sensors = <&ths 1>;
> };
> };
>
>
> I can't see any ths driver for the A64 or any entity that reads it, is it
> working on the A64?
>
> Jagan, you are extensively working on BananaPii M64 and NanoPi A64, do you
> have this working and can you give some directions?
>
> Thank you.
>
>
>
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
