On Wed, Feb 6, 2019 at 4:14 PM Linus Walleij <linus.wall...@linaro.org> wrote: > > On Wed, Feb 6, 2019 at 4:32 AM Chen-Yu Tsai <w...@csie.org> wrote: > > > The A80 SoC has configuration registers for I/O bias voltage. Incorrect > > settings would make the affected peripherals inoperable in some cases, > > such as Ethernet RGMII signals biased at 2.5V with the settings still > > at 3.3V. However low speed signals such as MDIO on the same group of > > pins seem to be unaffected. > > > > Previously there was no way to know what the actual voltage used was, > > short of hard-coding a value in the device tree. With the new pin bank > > regulator supply support in place, the driver can now query the > > regulator for its voltage, and if it's valid (as opposed to being the > > dummy regulator), set the bias voltage setting accordingly. > > > > Add a quirk to denote the presence of the configuration registers, and > > a function to set the correct setting based on the voltage read back > > from the regulator. > > > > This is only done when the regulator is first acquired and enabled. > > While it would be nice to have a notifier on the regulator so that when > > the voltage changes, the driver can update the setting, in practice no > > board currently supports dynamic changing of the I/O voltages. > > > > Signed-off-by: Chen-Yu Tsai <w...@csie.org> > > Hi Chen-Yu, > > thanks for the patch! I tried to apply it on the pinctrl devel branch > (for v5.1) but it failed to apply, I assume because it depends on > the fixes that I just sent to Torvalds. > > Shall we proceed like this that I merge v5.0-rc6 as soon as it is > out and then try to apply this on top of that instead, so we get > rid of this conflict?
Sure. That sounds like a good plan. ChenYu -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
