Allwinner sun8i, sun9i, and sun50i SoCs contain a hardware message box
used for communication between the ARM CPUs and the ARISC management
coprocessor. The hardware contains 8 unidirectional 4-message FIFOs.
Add a driver for it, so it can be used for SCPI or other communication
protocols.
Signed-off-by: Samuel Holland <sam...@sholland.org>
---
drivers/mailbox/Kconfig | 11 ++
drivers/mailbox/Makefile | 2 +
drivers/mailbox/sunxi-msgbox.c | 315 +++++++++++++++++++++++++++++++++
3 files changed, 328 insertions(+)
create mode 100644 drivers/mailbox/sunxi-msgbox.c
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index 3eeb12e93e98..6309e755d04a 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -205,4 +205,15 @@ config MTK_CMDQ_MBOX
mailbox driver. The CMDQ is used to help read/write registers with
critical time limitation, such as updating display configuration
during the vblank.
+
+config SUNXI_MSGBOX
+ tristate "Allwinner sunxi Message Box"
+ depends on ARCH_SUNXI || COMPILE_TEST
+ default ARCH_SUNXI
+ help
+ Mailbox implementation for the hardware message box present in
+ Allwinner sun8i, sun9i, and sun50i SoCs. The hardware message box is
+ used for communication between the application CPUs and the power
+ management coprocessor.
+
endif
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index c818b5d011ae..f29a119a3fac 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -44,3 +44,5 @@ obj-$(CONFIG_TEGRA_HSP_MBOX) += tegra-hsp.o
obj-$(CONFIG_STM32_IPCC) += stm32-ipcc.o
obj-$(CONFIG_MTK_CMDQ_MBOX) += mtk-cmdq-mailbox.o
+
+obj-$(CONFIG_SUNXI_MSGBOX) += sunxi-msgbox.o
diff --git a/drivers/mailbox/sunxi-msgbox.c b/drivers/mailbox/sunxi-msgbox.c
new file mode 100644
index 000000000000..fb0d733dd3b4
--- /dev/null
+++ b/drivers/mailbox/sunxi-msgbox.c
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2017-2019 Samuel Holland <sam...@sholland.org>
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_controller.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+
+#define NUM_CHANS 8
+
+#define CTRL_REG(n) (0x0000 + 0x4 * ((n) / 4))
+#define CTRL_RX(n) BIT(0 + 8 * ((n) % 4))
+#define CTRL_TX(n) BIT(4 + 8 * ((n) % 4))
+
+#define REMOTE_IRQ_EN_REG 0x0040
+#define REMOTE_IRQ_STATUS_REG 0x0050
+#define LOCAL_IRQ_EN_REG 0x0060
+#define LOCAL_IRQ_STATUS_REG 0x0070
+
+#define RX_IRQ(n) BIT(0 + 2 * (n))
+#define RX_IRQ_MASK 0x5555
+#define TX_IRQ(n) BIT(1 + 2 * (n))
+#define TX_IRQ_MASK 0xaaaa
+
+#define FIFO_STATUS_REG(n) (0x0100 + 0x4 * (n))
+#define FIFO_STATUS_MASK BIT(0)
+
+#define MSG_STATUS_REG(n) (0x0140 + 0x4 * (n))
+#define MSG_STATUS_MASK GENMASK(2, 0)
+
+#define MSG_DATA_REG(n) (0x0180 + 0x4 * (n))
+
+#define mbox_dbg(mbox, ...) dev_dbg((mbox)->controller.dev, __VA_ARGS__)
+
+struct sunxi_msgbox {
+ struct mbox_controller controller;
+ struct clk *clk;
+ spinlock_t lock;
+ void __iomem *regs;
+};
+
+static bool sunxi_msgbox_last_tx_done(struct mbox_chan *chan);
+static bool sunxi_msgbox_peek_data(struct mbox_chan *chan);
+
+static inline int channel_number(struct mbox_chan *chan)
+{
+ return chan - chan->mbox->chans;
+}
+
+static inline struct sunxi_msgbox *channel_to_msgbox(struct mbox_chan *chan)
+{
+ return (struct sunxi_msgbox *)chan->con_priv;
+}
+
+static irqreturn_t sunxi_msgbox_irq(int irq, void *dev_id)
+{
+ struct mbox_chan *chan;
+ struct sunxi_msgbox *mbox = dev_id;
+ int n;
+ uint32_t msg, status;
+
+ status = readl(mbox->regs + LOCAL_IRQ_STATUS_REG);
+ if (!(status & RX_IRQ_MASK))
+ return IRQ_NONE;
+
+ for (n = 0; n < NUM_CHANS; ++n) {
+ if (!(status & RX_IRQ(n)))
+ continue;
+ chan = &mbox->controller.chans[n];
+ while (sunxi_msgbox_peek_data(chan)) {
+ msg = readl(mbox->regs + MSG_DATA_REG(n));
+ mbox_dbg(mbox, "Channel %d received 0x%08x\n", n, msg);
+ mbox_chan_received_data(chan, &msg);
+ }
+ /* The IRQ can be cleared only when the FIFO is empty. */
+ writel(RX_IRQ(n), mbox->regs + LOCAL_IRQ_STATUS_REG);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int sunxi_msgbox_send_data(struct mbox_chan *chan, void *data)
+{
+ struct sunxi_msgbox *mbox = channel_to_msgbox(chan);
+ int n = channel_number(chan);
+ uint32_t msg = *(uint32_t *)data;
+
+ /* Using a channel backwards gets the hardware into a bad state. */
+ if (WARN_ON_ONCE(!(readl(mbox->regs + CTRL_REG(n)) & CTRL_TX(n))))
+ return 0;
+
+ /* We cannot post a new message if the FIFO is full. */
+ if (readl(mbox->regs + FIFO_STATUS_REG(n)) & FIFO_STATUS_MASK) {
+ mbox_dbg(mbox, "Channel %d busy sending 0x%08x\n", n, msg);
+ return -EBUSY;
+ }
+
+ writel(msg, mbox->regs + MSG_DATA_REG(n));
+ mbox_dbg(mbox, "Channel %d sent 0x%08x\n", n, msg);
+
+ return 0;
+}
+
+static int sunxi_msgbox_startup(struct mbox_chan *chan)
+{
+ struct sunxi_msgbox *mbox = channel_to_msgbox(chan);
+ int n = channel_number(chan);
+
+ /* The coprocessor is responsible for setting channel directions. */
+ if (readl(mbox->regs + CTRL_REG(n)) & CTRL_RX(n)) {
+ /* Clear existing messages in the receive FIFO. */
+ while (sunxi_msgbox_peek_data(chan))
+ readl(mbox->regs + MSG_DATA_REG(n));
+ writel(RX_IRQ(n), mbox->regs + LOCAL_IRQ_STATUS_REG);
+
+ /* Enable the receive interrupt. */
+ spin_lock(&mbox->lock);
+ writel(readl(mbox->regs + LOCAL_IRQ_EN_REG) | RX_IRQ(n),
+ mbox->regs + LOCAL_IRQ_EN_REG);
+ spin_unlock(&mbox->lock);
+ }
+
+ mbox_dbg(mbox, "Channel %d startup\n", n);
+
+ return 0;
+}
+
+static void sunxi_msgbox_shutdown(struct mbox_chan *chan)
+{
+ struct sunxi_msgbox *mbox = channel_to_msgbox(chan);
+ int n = channel_number(chan);
+
+ if (readl(mbox->regs + CTRL_REG(n)) & CTRL_RX(n)) {
+ /* Disable the receive interrupt. */
+ spin_lock(&mbox->lock);
+ writel(readl(mbox->regs + LOCAL_IRQ_EN_REG) & ~RX_IRQ(n),
+ mbox->regs + LOCAL_IRQ_EN_REG);
+ spin_unlock(&mbox->lock);
+
+ /* Clear existing messages in the receive FIFO. */
+ while (sunxi_msgbox_peek_data(chan))
+ readl(mbox->regs + MSG_DATA_REG(n));
+ writel(RX_IRQ(n), mbox->regs + LOCAL_IRQ_STATUS_REG);
+ }
+
+ mbox_dbg(mbox, "Channel %d shutdown\n", n);
+}
+
+static bool sunxi_msgbox_last_tx_done(struct mbox_chan *chan)
+{
+ struct sunxi_msgbox *mbox = channel_to_msgbox(chan);
+ int n = channel_number(chan);
+
+ /*
+ * The hardware allows snooping on the remote user's IRQ status. We
+ * consider a message to be acknowledged only when the receive IRQ for
+ * that channel is cleared. As the hardware only allows clearing the
+ * IRQ for a channel when the FIFO is empty, this still ensures that
+ * the message has actually been read. It also gives the receiver an
+ * opportunity to perform minimal processing before acknowledging a
+ * message.
+ */
+ return !(readl(mbox->regs + REMOTE_IRQ_STATUS_REG) & RX_IRQ(n));
+}
+
+static bool sunxi_msgbox_peek_data(struct mbox_chan *chan)
+{
+ struct sunxi_msgbox *mbox = channel_to_msgbox(chan);
+ int n = channel_number(chan);
+
+ return (readl(mbox->regs + MSG_STATUS_REG(n)) & MSG_STATUS_MASK) > 0;
+}
+
+static const struct mbox_chan_ops sunxi_msgbox_chan_ops = {
+ .send_data = sunxi_msgbox_send_data,
+ .startup = sunxi_msgbox_startup,
+ .shutdown = sunxi_msgbox_shutdown,
+ .last_tx_done = sunxi_msgbox_last_tx_done,
+ .peek_data = sunxi_msgbox_peek_data,
+};
+
+static int sunxi_msgbox_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mbox_chan *chans;
+ struct reset_control *reset;
+ struct resource *res;
+ struct sunxi_msgbox *mbox;
+ int i, ret;
+
+ mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+
+ chans = devm_kcalloc(dev, NUM_CHANS, sizeof(*chans), GFP_KERNEL);
+ if (!chans)
+ return -ENOMEM;
+
+ for (i = 0; i < NUM_CHANS; ++i)
+ chans[i].con_priv = mbox;
+
+ mbox->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(mbox->clk)) {
+ ret = PTR_ERR(mbox->clk);
+ dev_err(dev, "Failed to get clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(mbox->clk);
+ if (ret) {
+ dev_err(dev, "Failed to enable clock: %d\n", ret);
+ return ret;
+ }
+
+ reset = devm_reset_control_get(dev, NULL);
+ if (IS_ERR(reset)) {
+ ret = PTR_ERR(reset);
+ dev_err(dev, "Failed to get reset control: %d\n", ret);
+ goto err_disable_unprepare;
+ }
+
+ ret = reset_control_deassert(reset);
+ if (ret) {
+ dev_err(dev, "Failed to deassert reset: %d\n", ret);
+ goto err_disable_unprepare;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENODEV;
+ goto err_disable_unprepare;
+ }
+
+ mbox->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(mbox->regs)) {
+ ret = PTR_ERR(mbox->regs);
+ dev_err(dev, "Failed to map MMIO resource: %d\n", ret);
+ goto err_disable_unprepare;
+ }
+
+ /* Disable all interrupts for this end of the msgbox. */
+ writel(0, mbox->regs + LOCAL_IRQ_EN_REG);
+
+ ret = devm_request_irq(dev, irq_of_parse_and_map(dev->of_node, 0),
+ sunxi_msgbox_irq, 0, dev_name(dev), mbox);
+ if (ret) {
+ dev_err(dev, "Failed to register IRQ handler: %d\n", ret);
+ goto err_disable_unprepare;
+ }
+
+ mbox->controller.dev = dev;
+ mbox->controller.ops = &sunxi_msgbox_chan_ops;
+ mbox->controller.chans = chans;
+ mbox->controller.num_chans = NUM_CHANS;
+ mbox->controller.txdone_irq = false;
+ mbox->controller.txdone_poll = true;
+ mbox->controller.txpoll_period = 5;
+
+ spin_lock_init(&mbox->lock);
+ platform_set_drvdata(pdev, mbox);
+
+ ret = mbox_controller_register(&mbox->controller);
+ if (ret) {
+ dev_err(dev, "Failed to register controller: %d\n", ret);
+ goto err_disable_unprepare;
+ }
+
+ return 0;
+
+err_disable_unprepare:
+ clk_disable_unprepare(mbox->clk);
+
+ return ret;
+}
+
+static int sunxi_msgbox_remove(struct platform_device *pdev)
+{
+ struct sunxi_msgbox *mbox = platform_get_drvdata(pdev);
+
+ mbox_controller_unregister(&mbox->controller);
+ clk_disable_unprepare(mbox->clk);
+
+ return 0;
+}
+
+static const struct of_device_id sunxi_msgbox_of_match[] = {
+ { .compatible = "allwinner,sun6i-a31-msgbox", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sunxi_msgbox_of_match);
+
+static struct platform_driver sunxi_msgbox_driver = {
+ .driver = {
+ .name = "sunxi-msgbox",
+ .of_match_table = sunxi_msgbox_of_match,
+ },
+ .probe = sunxi_msgbox_probe,
+ .remove = sunxi_msgbox_remove,
+};
+module_platform_driver(sunxi_msgbox_driver);
+
+MODULE_AUTHOR("Samuel Holland <sam...@sholland.org>");
+MODULE_DESCRIPTION("Allwinner sunxi Message Box");
+MODULE_LICENSE("GPL v2");
--
2.19.2
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
