On Tue, Mar 19, 2019 at 12:30:25PM +0000, Måns Rullgård wrote: > Philipp Rossak <[email protected]> writes: > > > Allwiner H3 and A83T SoCs have a thermal sensor, which is a large refactored > > version of the old Allwinner "GPADC" (although it have already only > > thermal part left in A33). > > > > This patch tried to add support for the sensor in H3 and A83T based on > > > > This Patchtseries was in the beginning based on Icenowy Zengs v4 > > patchseries [1]. Since we decided to merge the mfd driver into the GPADC > > this changed. So only one patch could be reused. > > > > Patches that adds support for H5, A64, A80 and H6 SoCs are allready > > prepared, > > and will be upstreamed if this patchseries is applied and the testing is > > done. > > > > Sorry for delaying this. > > > > Regards, > > Philipp > > > > changes since v2: > > * mfd driver is now merged into the gpadc driver > > * complete rework > > > > changes since v1: > > * collecting all acks > > * rewording commits/fix typos > > * move code in place where it is used > > * fix naming conventions of defines > > * clarify commits > > * update documentation to cover the new nvmem calibraion > > * change nvmem calibration > > > > Icenowy Zheng (1): > > iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain > > A33 > > > > Philipp Rossak (29): > > mfd: Makefile: Remove build option for MFD:sun4i-gpadc > > mfd: Kconfig: Remove MFD_SUN4I_GPADC config option > > iio: adc: Remove ID table > > iio: adc: Kconfig: Update Kconfig to new build options > > iio: adc: move SUN4I_GPADC_CHANNEL define to header file > > iio: adc: remove ofnode options > > iio: adc: remove mfd_probe & sunwi_irq_init function > > iio: adc: remove hwmon structure > > iio: adc: Threat A33 as thermal sensor and remove non thermal sun4i > > channel > > iio: adc: rework irq and adc_channel handling > > iio: adc: add new compatibles > > mfd: Remove old mfd driver & Move sun4i-gpadc.h to iio/adc/ > > arm: config: Enable SUN4I_GPADC in defconfig > > dt-bindings: update the Allwinner GPADC device tree binding for H3 & > > A83T > > iio: adc: sun4i-gpadc-iio: rework: readout temp_data > > iio: adc: sun4i-gpadc-iio: rework: support clocks and reset > > iio: adc: sun4i-gpadc-iio: rework: support multiple sensors > > iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data > > iio: adc: sun4i-gpadc-iio: rework: device specific suspend & resume > > iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor > > iio: adc: sun4i-gpadc-iio: add support for A83T thermal sensor > > ARM: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5 > > ARM: dts: sun8i: h3: add support for the thermal sensor in H3 > > ARM: dts: sun8i: h3: add thermal zone to H3 > > ARM: dts: sun8i: h3: enable H3 sid controller > > ARM: dts: sun8i: h3: use calibration for ths > > ARM: dts: sun8i: a83t: add support for the thermal sensor in A83T > > ARM: dts: sun8i: a83t: add thermal zone to A83T > > ARM: sun8i: a83t: full range OPP tables and CPUfreq > > > > .../devicetree/bindings/iio/adc/sun4i-gpadc.txt | 41 +- > > arch/arm/boot/dts/sun8i-a83t.dtsi | 143 +++++ > > arch/arm/boot/dts/sun8i-h3.dtsi | 52 ++ > > arch/arm/boot/dts/sunxi-h3-h5.dtsi | 10 + > > arch/arm/configs/sunxi_defconfig | 1 + > > drivers/iio/adc/Kconfig | 11 +- > > drivers/iio/adc/sun4i-gpadc-iio.c | 617 > > +++++++++++++-------- > > drivers/mfd/Kconfig | 17 - > > drivers/mfd/Makefile | 1 - > > drivers/mfd/sun4i-gpadc.c | 181 ------ > > include/linux/{mfd => iio/adc}/sun4i-gpadc.h | 47 +- > > 11 files changed, 681 insertions(+), 440 deletions(-) > > delete mode 100644 drivers/mfd/sun4i-gpadc.c > > rename include/linux/{mfd => iio/adc}/sun4i-gpadc.h (72%) > > What became of these patches? I can't seem to find any follow-ups. Was > the approach abandoned in favour of something else?
It didn't, I don't think we ever got any follow-up to that series so that's the main reason it's been held back. Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
signature.asc
Description: PGP signature
