Hello Maxime, On Mon, Apr 01, 2019 at 01:56:16PM +0200, megous via linux-sunxi wrote: > From: Ondrej Jirman <[email protected]> > > TBS A711 tablet contains u-blox NEO-6M module connected to UART2. > Enable UART2 to gain access to the module from userspace.
Other GPS bits are now applied (thank you, Johan), so if this last bit can go in too via a sunxi tree, the series will be complete. thank you, Ondrej > Signed-off-by: Ondrej Jirman <[email protected]> > --- > arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts > b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts > index d70fe04b66f0..fd170bc45927 100644 > --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts > +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts > @@ -98,6 +98,13 @@ > }; > }; > > + reg_gps: reg-gps { > + compatible = "regulator-fixed"; > + regulator-name = "gps"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + }; > + > reg_vbat: reg-vbat { > compatible = "regulator-fixed"; > regulator-name = "vbat"; > @@ -422,6 +429,20 @@ > status = "okay"; > }; > > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart2_pb_pins>; > + status = "okay"; > + > + gnss { > + compatible = "u-blox,neo-6m"; > + > + v-bckp-supply = <®_rtc_ldo>; > + vcc-supply = <®_gps>; > + current-speed = <9600>; > + }; > +}; > + > &usb_otg { > dr_mode = "otg"; > status = "okay"; > -- > 2.21.0 > > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
