On Mon, 15 Apr 2019 at 10:18, Maxime Ripard <[email protected]> wrote: > > On Mon, Apr 15, 2019 at 10:09:11AM +0200, Clément Péron wrote: > > Hi, > > > > On Mon, 15 Apr 2019 at 10:04, Maxime Ripard <[email protected]> > > wrote: > > > > > > Hi, > > > > > > On Thu, Apr 11, 2019 at 11:44:19PM +0200, Clément Péron wrote: > > > > Allwinner H6 has a SPDIF controller with an increase of the fifo > > > > size and the possibility to output the master clock. > > > > However it's still compatible with the already existing driver for > > > > Allwiner H3. > > > > > > > > Add this compatible in the device-tree bindings documentation. > > > > > > How was this tested? > > > > Using Alsa utils on a Beelink GS1 and I check correct output sound on > > my home cinema. > > > > > After looking at the datasheet, it looks like it's still significantly > > > different. In particular: > > > > > > - The MCLK divider isn't at the same offset > > > > We don't use the MCLK > > > > > - The bits to flush the FIFO aren't at the same offset > > > - The FIFO trigger levels aren't at the same offset > > > - The FIFO status register layout is almost entirely different > > > > We use DMA not FIFO > > Well, DMA still uses the FIFOs. And even then, you're kind of missing > the point. The device tree's compatible is about whether a particular > device can be used as another one. How you are using it in the driver > is completely irrelevant.
Sorry I meant " We use DMA not PIO". I didn't change the driver and the SPDIF is working what's irrelevant in declaring the driver as compatible ? If some feature are missing they can be introduce later as there is a special binding for H6 no ? Clement > > Maxime > > -- > Maxime Ripard, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
