On Thu, Apr 18, 2019 at 01:14:35PM -0300, Pablo Sebastián Greco wrote: > > El 18/4/19 a las 12:56, Maxime Ripard escribió: > > On Thu, Apr 18, 2019 at 12:11:20PM -0300, Pablo Greco wrote: > > > Since the bananapi-m2-ultra and the bananapi-m2-berry have the same > > > WiFi/Bluetooth, add the required nodes to the bananapi-m2-berry. > > > > > > Signed-off-by: Pablo Greco <[email protected]> > > > --- > > > arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 26 > > > +++++++++++++++++++++++ > > > 1 file changed, 26 insertions(+) > > > > > > diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts > > > b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts > > > index 78f4a1a..3d0bb7e 100644 > > > --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts > > > +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts > > > @@ -96,6 +96,8 @@ > > > wifi_pwrseq: wifi_pwrseq { > > > compatible = "mmc-pwrseq-simple"; > > > reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 > > > WIFI_EN */ > > > + clocks = <&ccu CLK_OUTA>; > > > + clock-names = "ext_clock"; > > > }; > > > }; > > > > > > @@ -171,6 +173,11 @@ > > > status = "okay"; > > > }; > > > > > > +&pio { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&clk_out_a_pin>; > > > +}; > > > + > > I'm not sure you answered my question about why that is needed? > Because it is the same case as > https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts?id=1e5f1db4ccd8348a21da55bff82f4263000879ef > I can repeat that info in this commit log
Yes, please. Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
