Hi, SPL_TEXT_BASE move to Kconfig You need to set it.
https://patchwork.ozlabs.org/patch/1099637/ Regards, Clement On Wed, 15 May 2019 at 17:33, Philippe Fouquet <[email protected]> wrote: > > Hello > > I work with A64 (bpi M64). > For a moment I use to U-boot ( SPL build into 32 bit and u-boot in 64 bit) > and all worked well I had flash sd, eMMC or I booted with fel mode all are ok. > But I stoped my work for some weeks and now nothing boot any more. > > I try to explain my self, if I flash a sd with old image (that use boot0.bin) > all boot (I try three different image). But if I flash some new one (with > uboot SPL) nothing start (no log, no print on UART0). > > Some body know what can be wrong in my system? > > Thank by advance > Philippe > > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/linux-sunxi/096739ac-dd50-48f0-a003-019d7bac89be%40googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/CAJiuCccBceH6jiLFNsyaz0kZ0GKL-%3DwQNMh5KLE6WRR8ThwqXw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
