Hello!
On 21.05.2019 2:50, [email protected] wrote:
From: Icenowy Zheng <[email protected]>
The PHY selection bit also exists on SoCs without an internal PHY; if it's
set to 1 (internal PHY, default value) then the MAC will not make use of
any PHY such SoCs.
^ "on" or "with" missing?
This problem appears when adapting for H6, which has no real internal PHY
(the "internal PHY" on H6 is not on-die, but on a co-packaged AC200 chip,
connected via RMII interface at GPIO bank A).
Force the PHY selection bit to 0 when the SOC doesn't have an internal PHY,
to address the problem of a wrong default value.
Signed-off-by: Icenowy Zheng <[email protected]>
Signed-off-by: Ondrej Jirman <[email protected]>
[...]
MBR, Sergei
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/4e031eeb-2819-a97f-73bf-af84b04aa7b2%40cogentembedded.com.
For more options, visit https://groups.google.com/d/optout.
