>Do you have a setup that works with the BSP? Usually in cases like this I >would dump the >registers of the whole display engine and the TCON, and >compare them to see what's going on.
Not yet tested, because the new uboot can't load the original BSP Kernel. And I was thinking that it will be not so difficult. :-( The original System is an Android one. Can I change the uboot kernel bootargs and use the original Android kernel with changed Linux rootfs and boot them? Is that possible? If yes I would give this a try to check that I will get a running BSP System to dump the register. I dumped the tcon and ccu section from the original uboot which has a boot splash screen on the display. Should I also dump and compare the de (display section) as well? Any other register that I should dump and compare? John-Eric -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/MN2PR07MB70872F7EBA92908D261A46C6AB140%40MN2PR07MB7087.namprd07.prod.outlook.com. For more options, visit https://groups.google.com/d/optout.
