On Mon, Jun 24, 2019 at 10:29:27AM -0700, David Miller wrote:
> From: meg...@megous.com
> Date: Thu, 20 Jun 2019 15:47:42 +0200
>
> > From: Ondrej Jirman <meg...@megous.com>
> >
> > This series implements support for Xunlong Orange Pi 3 board.
> >
> > - ethernet support (patches 1-3)
> > - HDMI support (patches 4-6)
> >
> > For some people, ethernet doesn't work after reboot (but works on cold
> > boot), when the stmmac driver is built into the kernel. It works when
> > the driver is built as a module. It's either some timing issue, or power
> > supply issue or a combination of both. Module build induces a power
> > cycling of the phy.
> >
> > I encourage people with this issue, to build the driver into the kernel,
> > and try to alter the reset timings for the phy in DTS or
> > startup-delay-us and report the findings.
>
> This is a mixture of networking and non-networking changes so it really
> can't go through my tree.
>
> I wonder how you expect this series to be merged?
>
> Thanks.
This series was even longer before, with patches all around for various
maintainers. I'd expect that relevant maintainers pick the range of patches
meant for them. I don't know who's exactly responsible for what, but I think,
this should work:
- 2 stmmac patches should go together via some networking tree (is there
something specific for stmmac?)
- all DTS patches should go via sunxi
- hdmi patches via some drm tree
thank you and regards,
o.
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/20190624174637.6sznc5ifiuh4c3sm%40core.my.home.
For more options, visit https://groups.google.com/d/optout.
