Hi

On Sat, Jul 20, 2019 at 11:32 AM Maxime Ripard
<maxime.rip...@bootlin.com> wrote:
>
> On Sat, Jul 20, 2019 at 12:46:27PM +0530, Jagan Teki wrote:
> > On Sat, Jul 20, 2019 at 12:28 PM Maxime Ripard
> > <maxime.rip...@bootlin.com> wrote:
> > >
> > > On Thu, Jul 11, 2019 at 07:43:16PM +0200, Michael Nazzareno Trimarchi 
> > > wrote:
> > > > > > tcon-pixel clock is the rate that you want to achive on display side
> > > > > > and if you have 4 lanes 32bit or lanes and different bit number that
> > > > > > you need to have a clock that is able to put outside bits and speed
> > > > > > equal to pixel-clock * bits / lanes. so If you want a pixel-clock of
> > > > > > 40 mhz and you have 32bits and 4 lanes you need to have a clock of
> > > > > > 40 * 32 / 4 in no-burst mode. I think that this is done but most of
> > > > > > the display.
> > > > >
> > > > > So this is what the issue is then?
> > > > >
> > > > > This one does make sense, and you should just change the rate in the
> > > > > call to clk_set_rate in sun4i_tcon0_mode_set_cpu.
> > > > >
> > > > > I'm still wondering why that hasn't been brought up in either the
> > > > > discussion or the commit log before though.
> > > > >
> > > > Something like this?
> > > >
> > > > drivers/gpu/drm/sun4i/sun4i_tcon.c     | 20 +++++++++++---------
> > > >  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h |  2 --
> > > >  2 files changed, 11 insertions(+), 11 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> > > > b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> > > > index 64c43ee6bd92..42560d5c327c 100644
> > > > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> > > > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> > > > @@ -263,10 +263,11 @@ static int sun4i_tcon_get_clk_delay(const struct
> > > > drm_display_mode *mode,
> > > >  }
> > > >
> > > >  static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
> > > > -                                       const struct drm_display_mode 
> > > > *mode)
> > > > +                                       const struct drm_display_mode 
> > > > *mode,
> > > > +                                       u32 tcon_mul)
> > > >  {
> > > >         /* Configure the dot clock */
> > > > -       clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
> > > > +       clk_set_rate(tcon->dclk, mode->crtc_clock * tcon_mul * 1000);
> > > >
> > > >         /* Set the resolution */
> > > >         regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
> > > > @@ -335,12 +336,13 @@ static void sun4i_tcon0_mode_set_cpu(struct
> > > > sun4i_tcon *tcon,
> > > >         u8 bpp = mipi_dsi_pixel_format_to_bpp(device->format);
> > > >         u8 lanes = device->lanes;
> > > >         u32 block_space, start_delay;
> > > > -       u32 tcon_div;
> > > > +       u32 tcon_div, tcon_mul;
> > > >
> > > > -       tcon->dclk_min_div = SUN6I_DSI_TCON_DIV;
> > > > -       tcon->dclk_max_div = SUN6I_DSI_TCON_DIV;
> > > > +       tcon->dclk_min_div = 4;
> > > > +       tcon->dclk_max_div = 127;
> > > >
> > > > -       sun4i_tcon0_mode_set_common(tcon, mode);
> > > > +       tcon_mul = bpp / lanes;
> > > > +       sun4i_tcon0_mode_set_common(tcon, mode, tcon_mul);
> > > >
> > > >         /* Set dithering if needed */
> > > >         sun4i_tcon0_mode_set_dithering(tcon, 
> > > > sun4i_tcon_get_connector(encoder));
> > > > @@ -366,7 +368,7 @@ static void sun4i_tcon0_mode_set_cpu(struct
> > > > sun4i_tcon *tcon,
> > > >          */
> > > >         regmap_read(tcon->regs, SUN4I_TCON0_DCLK_REG, &tcon_div);
> > > >         tcon_div &= GENMASK(6, 0);
> > > > -       block_space = mode->htotal * bpp / (tcon_div * lanes);
> > > > +       block_space = mode->htotal * tcon_div * tcon_mul;
> > > >         block_space -= mode->hdisplay + 40;
> > > >
> > > >         regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI0_REG,
> > > > @@ -408,7 +410,7 @@ static void sun4i_tcon0_mode_set_lvds(struct
> > > > sun4i_tcon *tcon,
> > > >
> > > >         tcon->dclk_min_div = 7;
> > > >         tcon->dclk_max_div = 7;
> > > > -       sun4i_tcon0_mode_set_common(tcon, mode);
> > > > +       sun4i_tcon0_mode_set_common(tcon, mode, 1);
> > > >
> > > >         /* Set dithering if needed */
> > > >         sun4i_tcon0_mode_set_dithering(tcon, 
> > > > sun4i_tcon_get_connector(encoder));
> > > > @@ -487,7 +489,7 @@ static void sun4i_tcon0_mode_set_rgb(struct
> > > > sun4i_tcon *tcon,
> > > >
> > > >         tcon->dclk_min_div = 6;
> > > >         tcon->dclk_max_div = 127;
> > > > -       sun4i_tcon0_mode_set_common(tcon, mode);
> > > > +       sun4i_tcon0_mode_set_common(tcon, mode, 1);
> > > >
> > > >         /* Set dithering if needed */
> > > >         sun4i_tcon0_mode_set_dithering(tcon, connector);
> > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
> > > > b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
> > > > index 5c3ad5be0690..a07090579f84 100644
> > > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
> > > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
> > > > @@ -13,8 +13,6 @@
> > > >  #include <drm/drm_encoder.h>
> > > >  #include <drm/drm_mipi_dsi.h>
> > > >
> > > > -#define SUN6I_DSI_TCON_DIV     4
> > > > -
> > > >  struct sun6i_dsi {
> > > >         struct drm_connector    connector;
> > > >         struct drm_encoder      encoder;
> > >
> > > I had more something like this in mind:
> > > http://code.bulix.org/nlp5a4-803511
> >
> > Worth to look at it. was it working on your panel? meanwhile I will check 
> > it.
>
> I haven't tested it.
>
> > We have updated with below change [1], seems working on but is
> > actually checking the each divider as before start with 4... till 127.
> >
> > This new approach, is start looking the best divider from 4.. based on
> > the idea vs rounded it will ended up best divider like [2]
>
> But why?
>
> I mean, it's not like it's the first time I'm asking this...
>
> If the issue is what Micheal described, then the divider has nothing
> to do with it. We've had that discussion over and over again.
>

Sorry to quick copy and paste but my idea is somenthing like:

---
 drivers/gpu/drm/sun4i/sun4i_dotclock.c | 5 ++++-
 drivers/gpu/drm/sun4i/sun4i_tcon.c     | 9 ++++++---
 drivers/gpu/drm/sun4i/sun4i_tcon.h     | 1 +
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 2 --
 4 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_dotclock.c
b/drivers/gpu/drm/sun4i/sun4i_dotclock.c
index 417ade3d2565..b8be67cbb037 100644
--- a/drivers/gpu/drm/sun4i/sun4i_dotclock.c
+++ b/drivers/gpu/drm/sun4i/sun4i_dotclock.c
@@ -74,12 +74,15 @@ static long sun4i_dclk_round_rate(struct clk_hw
*hw, unsigned long rate,
        struct sun4i_tcon *tcon = dclk->tcon;
        unsigned long best_parent = 0;
        u8 best_div = 1;
+       u64 ideal = (u64)rate * tcon->dclk_mul;
        int i;

        for (i = tcon->dclk_min_div; i <= tcon->dclk_max_div; i++) {
-               u64 ideal = (u64)rate * i;
                unsigned long rounded;

+               if (!tcon->dclk_mul)
+                       ideal = (u64)rate * i;
+
                /*
                 * ideal has overflowed the max value that can be stored in an
                 * unsigned long, and every clk operation we might do on a
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c
b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 64c43ee6bd92..3301952bcf32 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -337,8 +337,9 @@ static void sun4i_tcon0_mode_set_cpu(struct
sun4i_tcon *tcon,
        u32 block_space, start_delay;
        u32 tcon_div;

-       tcon->dclk_min_div = SUN6I_DSI_TCON_DIV;
-       tcon->dclk_max_div = SUN6I_DSI_TCON_DIV;
+       tcon->dclk_min_div = 4;
+       tcon->dclk_max_div = 127;
+       tcon->dclk_mul = bpp / lanes;

        sun4i_tcon0_mode_set_common(tcon, mode);

@@ -366,7 +367,7 @@ static void sun4i_tcon0_mode_set_cpu(struct
sun4i_tcon *tcon,
         */
        regmap_read(tcon->regs, SUN4I_TCON0_DCLK_REG, &tcon_div);
        tcon_div &= GENMASK(6, 0);
-       block_space = mode->htotal * bpp / (tcon_div * lanes);
+       block_space = mode->htotal * tcon_div * tcon->dclk_mul;
        block_space -= mode->hdisplay + 40;

        regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI0_REG,
@@ -408,6 +409,7 @@ static void sun4i_tcon0_mode_set_lvds(struct
sun4i_tcon *tcon,

        tcon->dclk_min_div = 7;
        tcon->dclk_max_div = 7;
+       tcon->dclk_mul = 0;
        sun4i_tcon0_mode_set_common(tcon, mode);

        /* Set dithering if needed */
@@ -487,6 +489,7 @@ static void sun4i_tcon0_mode_set_rgb(struct
sun4i_tcon *tcon,

        tcon->dclk_min_div = 6;
        tcon->dclk_max_div = 127;
+       tcon->dclk_mul = 0;
        sun4i_tcon0_mode_set_common(tcon, mode);

        /* Set dithering if needed */
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h
b/drivers/gpu/drm/sun4i/sun4i_tcon.h
index f9f1fe80b206..44b69533778e 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
@@ -248,6 +248,7 @@ struct sun4i_tcon {
        struct clk                      *dclk;
        u8                              dclk_max_div;
        u8                              dclk_min_div;
+       u8                              dclk_mul;

        /* Reset control */
        struct reset_control            *lcd_rst;
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
index 5c3ad5be0690..a07090579f84 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
@@ -13,8 +13,6 @@
 #include <drm/drm_encoder.h>
 #include <drm/drm_mipi_dsi.h>

-#define SUN6I_DSI_TCON_DIV     4
-
 struct sun6i_dsi {
        struct drm_connector    connector;
        struct drm_encoder      encoder;
-- 
2.17.1


Michael

> So you need to come with some argument and proof that the divider of
> that clock need to change. Otherwise, stop trying to make that happen:
> it won't.
>
> Maxime
>
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com



-- 
| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
| COO  -  Founder                                      Cruquiuskade 47 |
| +31(0)851119172                                 Amsterdam 1018 AM NL |
|                  [`as] http://www.amarulasolutions.com               |

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/linux-sunxi/CAOf5uwmikqEJucsLSGz%2Bj3e1WJ_0ttFRu4-GQsdzdWfR_kvkuw%40mail.gmail.com.

Reply via email to