AXP813 PMIC has two Vbus maximum value settings -- one is the default
value, which is currently the only supported one; the other is the
really applied value, which is set according to the default value if the
BC detection module detected a charging port, or 500mA if no charging
port is detected.
Add support for reading and writing of the really applied Vbus maxmium
value. Interestingly it has a larger range than the default value.
Signed-off-by: Icenowy Zheng <icen...@aosc.io>
---
drivers/power/supply/axp20x_usb_power.c | 132 +++++++++++++++++++++++-
1 file changed, 129 insertions(+), 3 deletions(-)
diff --git a/drivers/power/supply/axp20x_usb_power.c
b/drivers/power/supply/axp20x_usb_power.c
index 5f0a5722b19e..905668a2727f 100644
--- a/drivers/power/supply/axp20x_usb_power.c
+++ b/drivers/power/supply/axp20x_usb_power.c
@@ -50,6 +50,18 @@
#define AXP813_BC_EN BIT(0)
+#define AXP813_VBUS_CLIMIT_REAL_MASK GENMASK(7, 4)
+#define AXP813_VBUS_CLIMIT_REAL_100mA (0 << 4)
+#define AXP813_VBUS_CLIMIT_REAL_500mA (1 << 4)
+#define AXP813_VBUS_CLIMIT_REAL_900mA (2 << 4)
+#define AXP813_VBUS_CLIMIT_REAL_1500mA (3 << 4)
+#define AXP813_VBUS_CLIMIT_REAL_2000mA (4 << 4)
+#define AXP813_VBUS_CLIMIT_REAL_2500mA (5 << 4)
+#define AXP813_VBUS_CLIMIT_REAL_3000mA (6 << 4)
+#define AXP813_VBUS_CLIMIT_REAL_3500mA (7 << 4)
+#define AXP813_VBUS_CLIMIT_REAL_4000mA (8 << 4)
+/* The remaining values are all 4000mA according to the datasheet */
+
/*
* Note do not raise the debounce time, we must report Vusb high within
* 100ms otherwise we get Vbus errors in musb.
@@ -159,6 +171,47 @@ static int axp813_get_current_max(struct axp20x_usb_power
*power, int *val)
return 0;
}
+static int axp813_get_input_current_limit(struct axp20x_usb_power *power, int
*val)
+{
+ unsigned int v;
+ int ret = regmap_read(power->regmap, AXP22X_CHRG_CTRL3, &v);
+
+ if (ret)
+ return ret;
+
+ switch (v & AXP813_VBUS_CLIMIT_REAL_MASK) {
+ case AXP813_VBUS_CLIMIT_REAL_100mA:
+ *val = 100000;
+ break;
+ case AXP813_VBUS_CLIMIT_REAL_500mA:
+ *val = 500000;
+ break;
+ case AXP813_VBUS_CLIMIT_REAL_900mA:
+ *val = 900000;
+ break;
+ case AXP813_VBUS_CLIMIT_REAL_1500mA:
+ *val = 1500000;
+ break;
+ case AXP813_VBUS_CLIMIT_REAL_2000mA:
+ *val = 2000000;
+ break;
+ case AXP813_VBUS_CLIMIT_REAL_2500mA:
+ *val = 2500000;
+ break;
+ case AXP813_VBUS_CLIMIT_REAL_3000mA:
+ *val = 3000000;
+ break;
+ case AXP813_VBUS_CLIMIT_REAL_3500mA:
+ *val = 3500000;
+ break;
+ default:
+ /* All other cases are 4000mA */
+ *val = 4000000;
+ break;
+ }
+ return 0;
+}
+
static int axp20x_usb_power_get_property(struct power_supply *psy,
enum power_supply_property psp, union power_supply_propval *val)
{
@@ -200,6 +253,8 @@ static int axp20x_usb_power_get_property(struct
power_supply *psy,
if (power->axp20x_id == AXP813_ID)
return axp813_get_current_max(power, &val->intval);
return axp20x_get_current_max(power, &val->intval);
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ return axp813_get_input_current_limit(power, &val->intval);
case POWER_SUPPLY_PROP_CURRENT_NOW:
if (IS_ENABLED(CONFIG_AXP20X_ADC)) {
ret = iio_read_channel_processed(power->vbus_i,
@@ -338,6 +393,48 @@ static int axp20x_usb_power_set_current_max(struct
axp20x_usb_power *power,
return -EINVAL;
}
+static int axp20x_usb_power_set_input_current_limit(struct axp20x_usb_power
*power,
+ int intval)
+{
+ int val;
+
+ switch (intval) {
+ case 100000:
+ val = AXP813_VBUS_CLIMIT_REAL_100mA;
+ break;
+ case 500000:
+ val = AXP813_VBUS_CLIMIT_REAL_500mA;
+ break;
+ case 900000:
+ val = AXP813_VBUS_CLIMIT_REAL_900mA;
+ break;
+ case 1500000:
+ val = AXP813_VBUS_CLIMIT_REAL_1500mA;
+ break;
+ case 2000000:
+ val = AXP813_VBUS_CLIMIT_REAL_2000mA;
+ break;
+ case 2500000:
+ val = AXP813_VBUS_CLIMIT_REAL_2500mA;
+ break;
+ case 3000000:
+ val = AXP813_VBUS_CLIMIT_REAL_3000mA;
+ break;
+ case 3500000:
+ val = AXP813_VBUS_CLIMIT_REAL_3500mA;
+ break;
+ case 4000000:
+ val = AXP813_VBUS_CLIMIT_REAL_4000mA;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(power->regmap,
+ AXP22X_CHRG_CTRL3,
+ AXP813_VBUS_CLIMIT_REAL_MASK, val);
+}
+
static int axp20x_usb_power_set_property(struct power_supply *psy,
enum power_supply_property psp,
const union power_supply_propval *val)
@@ -354,6 +451,9 @@ static int axp20x_usb_power_set_property(struct
power_supply *psy,
val->intval);
return axp20x_usb_power_set_current_max(power, val->intval);
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ return axp20x_usb_power_set_input_current_limit(power,
val->intval);
+
default:
return -EINVAL;
}
@@ -365,7 +465,8 @@ static int axp20x_usb_power_prop_writeable(struct
power_supply *psy,
enum power_supply_property psp)
{
return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN ||
- psp == POWER_SUPPLY_PROP_CURRENT_MAX;
+ psp == POWER_SUPPLY_PROP_CURRENT_MAX ||
+ psp == POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT;
}
static enum power_supply_property axp20x_usb_power_properties[] = {
@@ -386,6 +487,15 @@ static enum power_supply_property
axp22x_usb_power_properties[] = {
POWER_SUPPLY_PROP_CURRENT_MAX,
};
+static enum power_supply_property axp813_usb_power_properties[] = {
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+};
+
static const struct power_supply_desc axp20x_usb_power_desc = {
.name = "axp20x-usb",
.type = POWER_SUPPLY_TYPE_USB,
@@ -406,6 +516,16 @@ static const struct power_supply_desc
axp22x_usb_power_desc = {
.set_property = axp20x_usb_power_set_property,
};
+static const struct power_supply_desc axp813_usb_power_desc = {
+ .name = "axp20x-usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = axp813_usb_power_properties,
+ .num_properties = ARRAY_SIZE(axp813_usb_power_properties),
+ .property_is_writeable = axp20x_usb_power_prop_writeable,
+ .get_property = axp20x_usb_power_get_property,
+ .set_property = axp20x_usb_power_set_property,
+};
+
static int configure_iio_channels(struct platform_device *pdev,
struct axp20x_usb_power *power)
{
@@ -487,10 +607,16 @@ static int axp20x_usb_power_probe(struct platform_device
*pdev)
usb_power_desc = &axp20x_usb_power_desc;
irq_names = axp20x_irq_names;
} else if (power->axp20x_id == AXP221_ID ||
- power->axp20x_id == AXP223_ID ||
- power->axp20x_id == AXP813_ID) {
+ power->axp20x_id == AXP223_ID) {
usb_power_desc = &axp22x_usb_power_desc;
irq_names = axp22x_irq_names;
+ } else if (power->axp20x_id == AXP813_ID) {
+ usb_power_desc = &axp813_usb_power_desc;
+ irq_names = axp22x_irq_names;
+
+ /* Enable USB Battery Charging specification detection */
+ regmap_update_bits(axp20x->regmap, AXP288_BC_GLOBAL,
+ AXP813_BC_EN, AXP813_BC_EN);
} else {
dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
axp20x->variant);
--
2.21.0
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/20191002112545.58481-3-icenowy%40aosc.io.
