Enable Allwinner's USB 3.0 phy and the host controller. Orange Pi 3 board has GL3510 USB 3.0 4-port hub connected to the SoC's USB 3.0 port. All four ports are exposed via USB3-A connectors. VBUS is always on, since it's powered directly from DCIN (VCC-5V) and not switchable.
Signed-off-by: Ondrej Jirman <meg...@megous.com> --- arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index eb379cd402ac..259af5b0f1a7 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -94,6 +94,10 @@ status = "okay"; }; +&dwc3 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -285,3 +289,7 @@ usb3_vbus-supply = <®_vcc5v>; status = "okay"; }; + +&usb3phy { + status = "okay"; +}; -- 2.23.0 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20191024105500.2252707-5-megous%40megous.com.