From: Mylène Josserand <mylene.josser...@bootlin.com>
Add the support for enabling optional regulator that may be used as VCC
source.
Signed-off-by: Ondrej Jirman <meg...@megous.com>
Signed-off-by: Mylène Josserand <mylene.josser...@bootlin.com>
---
drivers/input/touchscreen/edt-ft5x06.c | 30 ++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/drivers/input/touchscreen/edt-ft5x06.c
b/drivers/input/touchscreen/edt-ft5x06.c
index 5525f1fb1526..d61731c0037d 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -28,6 +28,7 @@
#include <linux/input/mt.h>
#include <linux/input/touchscreen.h>
#include <asm/unaligned.h>
+#include <linux/regulator/consumer.h>
#define WORK_REGISTER_THRESHOLD 0x00
#define WORK_REGISTER_REPORT_RATE 0x08
@@ -88,6 +89,7 @@ struct edt_ft5x06_ts_data {
struct touchscreen_properties prop;
u16 num_x;
u16 num_y;
+ struct regulator *vcc;
struct gpio_desc *reset_gpio;
struct gpio_desc *wake_gpio;
@@ -1036,6 +1038,13 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
}
}
+static void edt_ft5x06_disable_regulator(void *arg)
+{
+ struct edt_ft5x06_ts_data *data = arg;
+
+ regulator_disable(data->vcc);
+}
+
static int edt_ft5x06_ts_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1064,6 +1073,27 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
tsdata->max_support_points = chip_data->max_support_points;
+ tsdata->vcc = devm_regulator_get(&client->dev, "vcc");
+ if (IS_ERR(tsdata->vcc)) {
+ error = PTR_ERR(tsdata->vcc);
+ if (error != -EPROBE_DEFER)
+ dev_err(&client->dev,
+ "failed to request regulator: %d\n", error);
+ return error;
+ }
+
+ error = regulator_enable(tsdata->vcc);
+ if (error < 0) {
+ dev_err(&client->dev, "failed to enable vcc: %d\n", error);
+ return error;
+ }
+
+ error = devm_add_action_or_reset(&client->dev,
+ edt_ft5x06_disable_regulator,
+ tsdata);
+ if (error)
+ return error;
+
tsdata->reset_gpio = devm_gpiod_get_optional(&client->dev,
"reset", GPIOD_OUT_HIGH);
if (IS_ERR(tsdata->reset_gpio)) {
--
2.23.0
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/20191029005806.3577376-2-megous%40megous.com.
