On Sun, Nov 24, 2019 at 06:29:02PM +0100, Clément Péron wrote: > Hi, > > This is a rework of Jernej's previous work[1] taking account all the > previous remarks. > > Bindings is still strict but probe in the driver are now optionnals. > > If someone could confirm that the PWM is not broken, as my board > doesn't output it. > > Thanks, > Clément > > Jernej's cover: > Allwinner H6 SoC has PWM core which is basically the same as that found > in A20, it's just depends on additional bus clock and reset line. > > This series adds support for it and extends PWM driver functionality in > a way that it's now possible to bypass whole core and output PWM source > clock directly as a PWM signal. This functionality is needed by AC200 > chip, which is bundled in same physical package as H6 SoC, to serve as a > clock source of 24 MHz. AC200 clock input pin is bonded internally to > the second PWM channel. > > I would be grateful if anyone can test this patch series for any kind of > regression on other SoCs. > > [1]: https://patchwork.kernel.org/cover/11061737/ > > Changes in v9: > - print error code in error message > - no capital letter to keep coherency > > Changes in v8: > - Display error return code > - split commit > - bypass is false if unsupported > - return instead of goto > > Changes in v7: > - Fix indent in Yaml bindings > > Changes in v6: > - Update git commit log > - Distinguish error message > > Changes in v5: > - Move bypass calculation to pwm_calculate > - Split mod_clock fallback from bus_clk probe > - Update comment > - Move my SoB after acked-by/reviewed-by > > Changes in v4: > - item description in correct order and add a blank line > - use %pe for printing PTR_ERR > - don't print error when it's an EPROBE_DEFER > - change output clock bypass formula to match PWM policy > > Changes in v3: > - Documentation update to allow one clock without name > - Change reset optional to shared > - If reset probe failed return an error > - Remove old clock probe > - Update bypass enabled formula > > Changes in v2: > - Remove allOf in Documentation > - Add H6 example in Documentation > - Change clock name from "pwm" to "mod" > - Change reset quirk to optional probe > - Change bus_clock quirk to optional probe > - Add limitation comment about mod_clk_output > - Add quirk for mod_clk_output > - Change bypass formula > > Clément Péron (2): > pwm: sun4i: Prefer "mod" clock to unnamed > pwm: sun4i: Always calculate params when applying new parameters > > Jernej Skrabec (4): > pwm: sun4i: Add an optional probe for reset line > pwm: sun4i: Add an optional probe for bus clock > pwm: sun4i: Add support to output source clock directly > pwm: sun4i: Add support for H6 PWM > > drivers/pwm/pwm-sun4i.c | 187 +++++++++++++++++++++++++++++++++------- > 1 file changed, 156 insertions(+), 31 deletions(-)
Applied, thanks. Thierry -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20200108124225.GD1993114%40ulmo.
signature.asc
Description: PGP signature
