The Pinebook does not use the CSI bus on the A64. In fact it does not use GPIO port E for anything at all. Thus the following regulators are not used and do not need voltages set:
- ALDO1: Connected to VCC-PE only - DLDO3: Not connected - ELDO3: Not connected Signed-off-by: Samuel Holland <[email protected]> --- .../boot/dts/allwinner/sun50i-a64-pinebook.dts | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index ff32ca1a495e..8e7ce6ad28dd 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -202,9 +202,7 @@ }; ®_aldo1 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-name = "vcc-csi"; + regulator-name = "vcc-pe"; }; ®_aldo2 { @@ -267,12 +265,6 @@ regulator-name = "vcc-edp"; }; -®_dldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "avdd-csi"; -}; - ®_dldo4 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -286,12 +278,6 @@ regulator-name = "cpvdd"; }; -®_eldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vdd-1v8-csi"; -}; - ®_fldo1 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; -- 2.23.0 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20200119163104.13274-3-samuel%40sholland.org.
