On Thu, Feb 13, 2020 at 10:43:04AM +0100, Maxime Ripard wrote:
> On Thu, Feb 13, 2020 at 12:23:57AM +0200, andrey.lebe...@gmail.com wrote:
> > From: Andrey Lebedev <and...@lebedev.lt>
> >
> > Define pins for LVDS channels 0 and 1, configure reset line for tcon0 and
> > provide sample LVDS panel, connected to tcon0.
> >
> > Signed-off-by: Andrey Lebedev <and...@lebedev.lt>
>
> And this prefix should be ARM: dts: sun7i ;)
Ah, thanks, I think I've got the pattern now!
> > + /omit-if-no-ref/
> > + lcd_lvds0_pins: lcd_lvds0_pins {
>
> underscores in the node names will create a dtc warning at
> compilation, you should use lcd-lvds0-pins instead.
You're right, I wasn't following the naming convention here. dtc doesn't
produce any warning on this though. Fixed that anyway.
> This will create a spurious warning message for TCON1, since we
> adjusted the driver to tell it supports LVDS, but there's no LVDS
> reset line, so we need to make it finer grained.
Yes, I can attribute two of the messages in my dmesg log [1] to this
("Missing LVDS properties" and "LVDS output disabled". "sun4i-tcon
1c0d000.lcd-controller" is indeed tcon1). And yes, I can see how they
can be confusing to someone.
I'd need some pointers on how to deal with that though (if we want to do
it in this scope).
[1] excerpt from kernel boot log:
[ 4.890975] sun4i-drm display-engine: bound 1e00000.display-frontend (ops
sun4i_frontend_driver_exit [sun4i_frontend])
[ 4.902032] sun4i-drm display-engine: bound 1e20000.display-frontend (ops
sun4i_frontend_driver_exit [sun4i_frontend])
[ 4.913467] sun4i-drm display-engine: bound 1e60000.display-backend (ops
sun4i_backend_ops [sun4i_backend])
[ 4.923806] sun4i-drm display-engine: bound 1e40000.display-backend (ops
sun4i_backend_ops [sun4i_backend])
[ 4.934451] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops
sun4i_tcon_platform_driver_exit [sun4i_tcon])
[ 4.945254] sun4i-tcon 1c0d000.lcd-controller: Missing LVDS properties,
Please upgrade your DT
[ 4.953935] sun4i-tcon 1c0d000.lcd-controller: LVDS output disabled
[ 4.960857] sun4i-drm display-engine: No panel or bridge found... RGB output
disabled
[ 4.968845] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops
sun4i_tcon_platform_driver_exit [sun4i_tcon])
[ 5.080874] sun4i-drm display-engine: bound 1c16000.hdmi (ops
sun4i_hdmi_driver_exit [sun4i_drm_hdmi])
[ 5.110087] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on
minor 0
[ 5.763064] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device
--
Andrey Lebedev aka -.- . -.. -.. . .-.
Software engineer
Homepage: http://lebedev.lt/
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/20200213200823.GA28336%40kedthinkpad.
