Hi,
On Mon, Feb 24, 2020 at 06:06:20PM +0100, Daniel Lezcano wrote:
> On 24/02/2020 17:54, Ondrej Jirman wrote:
> > This enables passive cooling by down-regulating CPU voltage
> > clocks = <&ccu CLK_C1CPUX>;
> > @@ -1188,12 +1188,60 @@ cpu0_thermal: cpu0-thermal {
> > polling-delay-passive = <0>;
> > polling-delay = <0>;
> > thermal-sensors = <&ths 0>;
> > +
> > + trips {
> > + cpu0_hot: cpu-hot {
> > + temperature = <80000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > +
> > + cpu0_very_hot: cpu-very-hot {
> > + temperature = <100000>;
> > + hysteresis = <0>;
> > + type = "critical";
> > + };
> > + };
> > +
> > + cooling-maps {
> > + cpu-hot-limit {
> > + trip = <&cpu0_hot>;
> > + cooling-device = <&cpu0
> > THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&cpu1
> > THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&cpu2
> > THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&cpu3
> > THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > + };
> > };
> >
> > cpu1_thermal: cpu1-thermal {
> > polling-delay-passive = <0>;
>
> No polling to mitigate?
Polling to mitigate what?
The driver is using interrupts whenever new reading is available, and
notifies tz of the change. I don't have a reason to believe any new
values are available from thermal sensor outside of the interrupt
period.
> > polling-delay = <0>;
> > thermal-sensors = <&ths 1>;
> > +
> > + trips {
> > + cpu1_hot: cpu-hot {
> > + temperature = <80000>;
> > + hysteresis = <2000>;
> > + type = "passive";
>
> I'm curious, can you really reach this temperature with a cortex-a7
> running at 1.2GHz max?
That depends on ambient temperature. I'd say easily. My A83T is running
iniside enclosed space with no cooling other than dissipating heat to
the board.
Anyway, I'm running my A83T boards at 1.8GHz. And A83T can run up to 2GHz
at the best SoC bin.
I'll probably submit updated cpufreq table at some point too, once I fix
it up to use the SoC bin information.
https://megous.com/git/linux/commit/?h=ths-5.6&id=171b7c3c3db98b5939d28d0c96b384edda95cec3
regards,
o.
> > + };
> > +
> > + cpu1_very_hot: cpu-very-hot {
> > + temperature = <100000>;
> > + hysteresis = <0>;
> > + type = "critical";
> > + };
> > + };
> > +
> > + cooling-maps {
> > + cpu-hot-limit {
> > + trip = <&cpu1_hot>;
> > + cooling-device = <&cpu100
> > THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&cpu101
> > THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&cpu102
> > THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&cpu103
> > THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > + };
> > };
> >
> > gpu_thermal: gpu-thermal {
> >
>
>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog
>
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/20200224172328.yauwfgov664ayrd6%40core.my.home.
