[linux-sunxi] [PATCH v5 5/9] arm64: dts: allwinner: h6: Enable CPU opp tables for Beelink GS1

[Clément Péron]

Enable CPU opp tables for Beelink GS1.

This needs to change the CPU regulator max voltage to fit
the OPP table.

Also add the ramp-delay information to avoid any out of spec
running as the regulator is slower at reaching the voltage
requested compare to the PLL reaching the frequency.

There is no such information for AXP805 but similar PMIC (AXP813)
has a DVM (Dynamic Voltage scaling Management) ramp rate equal
to 2500uV/us.

Signed-off-by: Clément Péron <peron.c...@gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts 
b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 8f09d209359b..3f7ceeb1a767 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -4,6 +4,7 @@
 /dts-v1/;
 
 #include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -77,6 +78,10 @@
        };
 };
 
+&cpu0 {
+       cpu-supply = <&reg_dcdca>;
+};
+
 &de {
        status = "okay";
 };
@@ -234,7 +239,8 @@
                        reg_dcdca: dcdca {
                                regulator-always-on;
                                regulator-min-microvolt = <810000>;
-                               regulator-max-microvolt = <1080000>;
+                               regulator-max-microvolt = <1160000>;
+                               regulator-ramp-delay = <2500>;
                                regulator-name = "vdd-cpu";
                        };
 
@@ -242,6 +248,7 @@
                                regulator-enable-ramp-delay = <32000>;
                                regulator-min-microvolt = <810000>;
                                regulator-max-microvolt = <1080000>;
+                               regulator-ramp-delay = <2500>;
                                regulator-name = "vdd-gpu";
                        };
 
-- 
2.20.1

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/linux-sunxi/20200420130021.3841-6-peron.clem%40gmail.com.