Add pwr and status leds configuration and turn on pwr led by default for Orange
Pi Zero Plus 2 (both H3 and H5 variants).

Signed-off-by: Diego Rondini <diego.rond...@kynetics.com>
---
v2:
- sorted node alphabetically
- fixed underscore in led names
- removed extra empty line
---
 .../arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts | 15 +++++++++++++++
 .../allwinner/sun50i-h5-orangepi-zero-plus2.dts   | 15 +++++++++++++++
 2 files changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts 
b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
index cbe32b975c5fe..251bbab7d7073 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
@@ -70,6 +70,21 @@ hdmi_con_in: endpoint {
                };
        };
 
+       leds {
+               compatible = "gpio-leds";
+
+               pwr {
+                       label = "orangepi:green:pwr";
+                       gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+               };
+
+               status {
+                       label = "orangepi:red:status";
+                       gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
        reg_vcc3v3: vcc3v3 {
                compatible = "regulator-fixed";
                regulator-name = "vcc3v3";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts 
b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index e67733d133bb4..de19e68eb84e0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -30,6 +30,21 @@ hdmi_con_in: endpoint {
                };
        };
 
+       leds {
+               compatible = "gpio-leds";
+
+               pwr {
+                       label = "orangepi:green:pwr";
+                       gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+               };
+
+               status {
+                       label = "orangepi:red:status";
+                       gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
        reg_vcc3v3: vcc3v3 {
                compatible = "regulator-fixed";
                regulator-name = "vcc3v3";
-- 
2.26.2

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/linux-sunxi/20200615130223.34464-2-diego.rondini%40kynetics.com.

Reply via email to