Hello Sam,
On Fri, Jul 03, 2020 at 07:11:55AM +0200, Sam Ravnborg wrote:
> Hi Ondrej.
>
> > > My bot found errors running 'make dt_binding_check' on your patch:
> > >
> > > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/nwl-dsi.example.dt.yaml:
> > > panel@0: '#address-cells', '#size-cells', 'port@0' do not match any of
> > > the regexes: 'pinctrl-[0-9]+'
> > > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/nwl-dsi.example.dt.yaml:
> > > panel@0: 'vcc-supply' is a required property
> > > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/nwl-dsi.example.dt.yaml:
> > > panel@0: 'iovcc-supply' is a required property
> > > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/nwl-dsi.example.dt.yaml:
> > > panel@0: 'reset-gpios' is a required property
> >
> > Paths look bogus ^^^^
> >
> > It should be .../rocktech,jh057n00900.yaml: ...
>
> The example in nwl-dsi.yaml contains:
> compatible = "rocktech,jh057n00900";
>
> So the example is checked against your updated binding.
> And the binding check fails because the example is no longer valid.
Ah, now I understand.
> This needs to be fixed as we do not wat to introduce new errors.
> Either the example or the binding needs the fix.
I think we can unrequire the supplies, but reset is needed really.
The panel only has one port, so there should be no address/size-cells
in the example, and port@0 should be just port to match existing binding.
If it had multiple ports, port@0 would have to be inside ports { } node
anyway, according to the existing binding. Then add reset-gpios to
the example...
And that should fix it.
I'll prepare the patch shortly.
regards,
o.
> Sam
>
>
> >
> > regards,
> > o.
> >
> > >
> > > See https://patchwork.ozlabs.org/patch/1320690
> > >
> > > If you already ran 'make dt_binding_check' and didn't see the above
> > > error(s), then make sure dt-schema is up to date:
> > >
> > > pip3 install git+https://github.com/devicetree-org/dt-schema.git@master
> > > --upgrade
> > >
> > > Please check and re-submit.
> > >
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/20200703104448.iwhxk77d2hyrr3x5%40core.my.home.
