Make enable-gpio optional to allow using this driver with boards that have vibrator connected to a power supply without intermediate gpio based enable circuitry.
Also avoid a case where neither regulator nor enable gpio is specified, and bail out in probe in such a case. Signed-off-by: Ondrej Jirman <[email protected]> --- drivers/input/misc/gpio-vibra.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/input/misc/gpio-vibra.c b/drivers/input/misc/gpio-vibra.c index f79f75595dd7..b3bb7e61ed1d 100644 --- a/drivers/input/misc/gpio-vibra.c +++ b/drivers/input/misc/gpio-vibra.c @@ -39,7 +39,7 @@ static int gpio_vibrator_start(struct gpio_vibrator *vibrator) struct device *pdev = vibrator->input->dev.parent; int err; - if (!vibrator->vcc_on) { + if (vibrator->vcc && !vibrator->vcc_on) { err = regulator_enable(vibrator->vcc); if (err) { dev_err(pdev, "failed to enable regulator: %d\n", err); @@ -57,7 +57,7 @@ static void gpio_vibrator_stop(struct gpio_vibrator *vibrator) { gpiod_set_value_cansleep(vibrator->gpio, 0); - if (vibrator->vcc_on) { + if (vibrator->vcc && vibrator->vcc_on) { regulator_disable(vibrator->vcc); vibrator->vcc_on = false; } @@ -112,7 +112,7 @@ static int gpio_vibrator_probe(struct platform_device *pdev) if (!vibrator->input) return -ENOMEM; - vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc"); + vibrator->vcc = devm_regulator_get_optional(&pdev->dev, "vcc"); err = PTR_ERR_OR_ZERO(vibrator->vcc); if (err) { if (err != -EPROBE_DEFER) @@ -121,7 +121,8 @@ static int gpio_vibrator_probe(struct platform_device *pdev) return err; } - vibrator->gpio = devm_gpiod_get(&pdev->dev, "enable", GPIOD_OUT_LOW); + vibrator->gpio = devm_gpiod_get_optional(&pdev->dev, "enable", + GPIOD_OUT_LOW); err = PTR_ERR_OR_ZERO(vibrator->gpio); if (err) { if (err != -EPROBE_DEFER) @@ -130,6 +131,11 @@ static int gpio_vibrator_probe(struct platform_device *pdev) return err; } + if (!vibrator->vcc && !vibrator->gpio) { + dev_err(&pdev->dev, "Neither gpio nor regulator provided\n"); + return -EINVAL; + } + INIT_WORK(&vibrator->play_work, gpio_vibrator_play_work); vibrator->input->name = "gpio-vibrator"; -- 2.27.0 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20200714102303.3007896-3-megous%40megous.com.
