On 16/10/2020 10:33, Icenowy Zheng wrote:
Hi,
> Previously, because we have no source code about the DRAM initialization
> of V3s and missing some configurations (delays and MBUS QoS info), our
> V3s DRAM initialization sequence is hacked from the H3 one.
>
> As the SDK shipped with PineCube contains source code for V3s libdram,
> we can retrieve these information from it and tweak some other magic
> bits.
Nice! Thanks for taking care.
> Signed-off-by: Icenowy Zheng <icen...@aosc.io>
I couldn't be asked to check the specific bits in the new V3s libdram,
nor do I have any hardware to test this, but I checked the integration
into the driver, and compile tested for the LicheePi and H3 boards.
The code size for H3 stayed the same, for the LicheePi it actually
decreased.
So from this perspective:
Reviewed-by: Andre Przywara <andre.przyw...@arm.com>
Cheers,
Andre
> ---
> arch/arm/include/asm/arch-sunxi/cpu.h | 1 +
> arch/arm/mach-sunxi/dram_sunxi_dw.c | 91 +++++++++++++++++++++++++--
> 2 files changed, 87 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h
> b/arch/arm/include/asm/arch-sunxi/cpu.h
> index 4c399b0a15..8b57d24e2f 100644
> --- a/arch/arm/include/asm/arch-sunxi/cpu.h
> +++ b/arch/arm/include/asm/arch-sunxi/cpu.h
> @@ -16,6 +16,7 @@
>
> #define SOCID_A64 0x1689
> #define SOCID_H3 0x1680
> +#define SOCID_V3S 0x1681
> #define SOCID_H5 0x1718
> #define SOCID_R40 0x1701
>
> diff --git a/arch/arm/mach-sunxi/dram_sunxi_dw.c
> b/arch/arm/mach-sunxi/dram_sunxi_dw.c
> index a462538521..d0600011ff 100644
> --- a/arch/arm/mach-sunxi/dram_sunxi_dw.c
> +++ b/arch/arm/mach-sunxi/dram_sunxi_dw.c
> @@ -63,6 +63,8 @@ enum {
> MBUS_PORT_CSI = 5,
> MBUS_PORT_NAND = 6,
> MBUS_PORT_SS = 7,
> + MBUS_PORT_DE_V3S = 8,
> + MBUS_PORT_DE_CFD_V3S = 9,
> MBUS_PORT_TS = 8,
> MBUS_PORT_DI = 9,
> MBUS_PORT_DE = 10,
> @@ -134,6 +136,29 @@ static void mctl_set_master_priority_h3(void)
> MBUS_CONF(DE_CFD, true, HIGH, 0, 1024, 288, 64);
> }
>
> +static void mctl_set_master_priority_v3s(void)
> +{
> + struct sunxi_mctl_com_reg * const mctl_com =
> + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
> +
> + /* enable bandwidth limit windows and set windows size 1us */
> + writel((1 << 16) | (400 << 0), &mctl_com->bwcr);
> +
> + /* set cpu high priority */
> + writel(0x00000001, &mctl_com->mapr);
> +
> + MBUS_CONF( CPU, true, HIGHEST, 0, 160, 100, 80);
> + MBUS_CONF( GPU, true, HIGH, 0, 1792, 1536, 0);
> + MBUS_CONF( UNUSED, true, HIGHEST, 0, 256, 128, 80);
> + MBUS_CONF( DMA, true, HIGH, 0, 256, 100, 0);
> + MBUS_CONF( VE, true, HIGH, 0, 2048, 1600, 0);
> + MBUS_CONF( CSI, true, HIGHEST, 0, 384, 256, 0);
> + MBUS_CONF( NAND, true, HIGH, 0, 100, 50, 0);
> + MBUS_CONF( SS, true, HIGH, 0, 384, 256, 0);
> + MBUS_CONF( DE_V3S, false, HIGH, 0, 8192, 4096, 0);
> + MBUS_CONF(DE_CFD_V3S, true, HIGH, 0, 640, 256, 0);
> +}
> +
> static void mctl_set_master_priority_a64(void)
> {
> struct sunxi_mctl_com_reg * const mctl_com =
> @@ -231,6 +256,9 @@ static void mctl_set_master_priority(uint16_t socid)
> case SOCID_H3:
> mctl_set_master_priority_h3();
> return;
> + case SOCID_V3S:
> + mctl_set_master_priority_v3s();
> + return;
> case SOCID_A64:
> mctl_set_master_priority_a64();
> return;
> @@ -334,6 +362,28 @@ static void mctl_h3_zq_calibration_quirk(struct
> dram_para *para)
> }
> }
>
> +static void mctl_v3s_zq_calibration_quirk(struct dram_para *para)
> +{
> + struct sunxi_mctl_ctl_reg * const mctl_ctl =
> + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
> +
> + u32 reg_val;
> +
> + clrsetbits_le32(&mctl_ctl->zqcr, 0xffffff,
> + CONFIG_DRAM_ZQ & 0xffffff);
> + mctl_phy_init(PIR_ZCAL);
> +
> + reg_val = readl(&mctl_ctl->zqdr[0]);
> + reg_val &= (0x1f << 16) | (0x1f << 0);
> + reg_val |= reg_val << 8;
> + writel(reg_val, &mctl_ctl->zqdr[0]);
> +
> + reg_val = readl(&mctl_ctl->zqdr[1]);
> + reg_val &= (0x1f << 16) | (0x1f << 0);
> + reg_val |= reg_val << 8;
> + writel(reg_val, &mctl_ctl->zqdr[1]);
> +}
> +
> static void mctl_set_cr(uint16_t socid, struct dram_para *para)
> {
> struct sunxi_mctl_com_reg * const mctl_com =
> @@ -391,7 +441,7 @@ static void mctl_sys_init(uint16_t socid, struct
> dram_para *para)
> CCM_DRAMCLK_CFG_DIV(1) |
> CCM_DRAMCLK_CFG_SRC_PLL11 |
> CCM_DRAMCLK_CFG_UPD);
> - } else if (socid == SOCID_H3 || socid == SOCID_H5) {
> + } else if (socid == SOCID_H3 || socid == SOCID_H5 || socid ==
> SOCID_V3S) {
> clock_set_pll5(CONFIG_DRAM_CLK * 2 * 1000000, false);
> clrsetbits_le32(&ccm->dram_clk_cfg,
> CCM_DRAMCLK_CFG_DIV_MASK |
> @@ -474,6 +524,13 @@ static int mctl_channel_init(uint16_t socid, struct
> dram_para *para)
> /* dphy & aphy phase select 270 degree */
> clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
> (0x1 << 10) | (0x2 << 8));
> + } else if (socid == SOCID_V3S) {
> + /* dx ddr_clk & hdr_clk dynamic mode */
> + clrbits_le32(&mctl_ctl->pgcr[0], (0x3 << 14) | (0x3 << 12));
> +
> + /* dphy & aphy phase select 270 degree */
> + clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
> + (0x1 << 10) | (0x1 << 8));
> } else if (socid == SOCID_A64 || socid == SOCID_H5) {
> /* dphy & aphy phase select ? */
> clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
> @@ -506,7 +563,12 @@ static int mctl_channel_init(uint16_t socid, struct
> dram_para *para)
> mctl_set_bit_delays(para);
> udelay(50);
>
> - if (socid == SOCID_H3) {
> + if (socid == SOCID_V3S) {
> + mctl_v3s_zq_calibration_quirk(para);
> +
> + mctl_phy_init(PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
> + PIR_DRAMRST | PIR_DRAMINIT | PIR_QSGATE);
> + } else if (socid == SOCID_H3) {
> mctl_h3_zq_calibration_quirk(para);
>
> mctl_phy_init(PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
> @@ -570,7 +632,7 @@ static int mctl_channel_init(uint16_t socid, struct
> dram_para *para)
> udelay(10);
>
> /* set PGCR3, CKE polarity */
> - if (socid == SOCID_H3)
> + if (socid == SOCID_H3 || socid == SOCID_V3S)
> writel(0x00aa0060, &mctl_ctl->pgcr[3]);
> else if (socid == SOCID_A64 || socid == SOCID_H5 || socid == SOCID_R40)
> writel(0xc0aa0060, &mctl_ctl->pgcr[3]);
> @@ -636,6 +698,22 @@ static void mctl_auto_detect_dram_size(uint16_t socid,
> struct dram_para *para)
> 0, 0, 0, 0, 0, 0, 0, 0, \
> 0, 0, 0, 0, 0, 0, 0 }
>
> +#define SUN8I_V3S_DX_READ_DELAYS \
> + {{ 8, 8, 8, 8, 8, 8, 8, 8, 8, 0, 0 }, \
> + { 7, 7, 7, 7, 7, 7, 7, 7, 7, 0, 0 }, \
> + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
> + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }}
> +#define SUN8I_V3S_DX_WRITE_DELAYS \
> + {{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 4, 4 }, \
> + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 2 }, \
> + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
> + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }}
> +#define SUN8I_V3S_AC_DELAYS \
> + { 0, 0, 0, 0, 0, 0, 0, 0, \
> + 0, 0, 0, 0, 0, 0, 0, 0, \
> + 0, 0, 0, 0, 0, 0, 0, 0, \
> + 0, 0, 0, 0, 0, 0, 0 }
> +
> #define SUN8I_R40_DX_READ_DELAYS \
> {{ 14, 14, 14, 14, 14, 14, 14, 14, 14, 0, 0 }, \
> { 14, 14, 14, 14, 14, 14, 14, 14, 14, 0, 0 }, \
> @@ -702,6 +780,10 @@ unsigned long sunxi_dram_init(void)
> .dx_read_delays = SUN8I_H3_DX_READ_DELAYS,
> .dx_write_delays = SUN8I_H3_DX_WRITE_DELAYS,
> .ac_delays = SUN8I_H3_AC_DELAYS,
> +#elif defined(CONFIG_MACH_SUN8I_V3S)
> + .dx_read_delays = SUN8I_V3S_DX_READ_DELAYS,
> + .dx_write_delays = SUN8I_V3S_DX_WRITE_DELAYS,
> + .ac_delays = SUN8I_V3S_AC_DELAYS,
> #elif defined(CONFIG_MACH_SUN8I_R40)
> .dx_read_delays = SUN8I_R40_DX_READ_DELAYS,
> .dx_write_delays = SUN8I_R40_DX_WRITE_DELAYS,
> @@ -728,8 +810,7 @@ unsigned long sunxi_dram_init(void)
> /* Currently we cannot support R40 with dual rank memory */
> para.dual_rank = 0;
> #elif defined(CONFIG_MACH_SUN8I_V3S)
> - /* TODO: set delays and mbus priority for V3s */
> - uint16_t socid = SOCID_H3;
> + uint16_t socid = SOCID_V3S;
> #elif defined(CONFIG_MACH_SUN50I)
> uint16_t socid = SOCID_A64;
> #elif defined(CONFIG_MACH_SUN50I_H5)
>
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/1820556e-b2e8-b6ae-d7e0-a6c63be12ef0%40arm.com.
